Download Print this page
Hide thumbs Also See for ENC-H-W Series:

Advertisement

Quick Links

Quick Start Guide
ENC-H-W*
Introduction
Welcome to KBC Networks' Quick Start Guide for
the H.264 encoder. This document provides
some quick tips on how to get up and running.
For more detailed information see the Downloads
section below.
Features:
H.264 or MPEG4 selectable compression
encoding
NTSC/PAL support
RS-485/422, 232 support
DI/DO bi-directional contact closure
Compatibility with KBC MPEG4 decoder in
MPEG4 mode
Downloads
Installation manual
Other features and functions are described in the
unabridged manual:
http://www.kbcnetworks.com/ip-
encoder/network-products/ip-encoder
Specification sheet:
http://www.kbcnetworks.com/ip-
encoder/network-products/ip-encoder
IP utility:
http://www.kbcnetworks.com/specification-
downloads/software
QSG-Encoder_H264-Rev1206E
Copyright © KBC Networks Ltd. 2012
H.264 Encoder
System Contents
Qty Description
1
H.264/MPEG4 selectable encoder
1
12 Vdc 1500mA power supply
Solid black wire (no white stripe) to GND terminal
Wire with white stripe to 12V terminal
Note:
The encoder is not 802.3af / at PoE compliant and
must be powered using the supplied 12Vdc
transformer
Equipment Required for Physical
Deployment
Ethernet Cat5 or Cat6 straight-through
cable
Coaxial cable
Twisted pair for RS-422/485/232 data
connection
Note:
To connect to a KBC decoder, a computer will be
needed to configure the encoder to MPEG4.
Default Settings
IP Address (Static): 192.168.1.100
GUI Access User Name: admin
GUI Access Password: admin
Encoder Type: H.264
Note:
If the unit is hard reset to defaults the IP address will
change to dynamic 192.168.0.100 and the ID and
password to access the GUI will be Admin / 123456
Accessing the Encoder
If your computer is set to a static IP on the same
subnet as the encoder, its web browser interface
can be accessed using Internet Explorer (Version
6.0 or above) at
http://192.168.1.100
IP utility link (tool available on the KBC website,
see downloads section of this quick start guide).
Note:
Microsoft Internet Explorer v6.0 and above is the
only web browser supported
www.kbcnetworks.com
or via the

Advertisement

loading

Summary of Contents for KBC ENC-H-W Series

  • Page 1 • section below. Twisted pair for RS-422/485/232 data • connection Features: Note: To connect to a KBC decoder, a computer will be needed to configure the encoder to MPEG4. H.264 or MPEG4 selectable compression • encoding NTSC/PAL support • Default Settings RS-485/422, 232 support •...
  • Page 2 To enable video streaming when connected Normal state activity unless PTZ brown button next to the 12VDC input while the to a KBC Decoder, the ENC-H-W* encoder controls are being transmitted unit is powering on. Hold the button for 20 from the decoder side.

This manual is also suitable for:

H.264