Advertisement
Quick Links
Advertisement
Summary of Contents for FirstBIKE SKI SET
- Page 1 “SKI SET” ASSEMBLY INSTRUCTIONS...
- Page 2 INTRODUCTION Thank you for purchasing the FirstBIKE SKI SET! There are different setups possible: - Basic: front ski only in combination with standard rear wheel for great traction and easy control - Advanced: front ski and rear ski for easy sliding and ultimate carving action.
- Page 3 “SKI SET” ASSEMBLY CONTENT 2 pcs 2 pcs Rear ski insert (for attachment rear ski) 2 pcs Front ski insert (for attachment of front ski) 2 pcs Food peg 4 pcs Bolt M6 x 35 4 pcs Washer M6 1 pc Hexagon „Allen“...
-
Page 4: Removing The Wheel
STEP 1 REMOVING THE WHEEL When the frame is separated from the rear-wheel assembly, allow the frame to drop downward. Remove the brake cable from the drum and use the supplied zip tie (part H) to secure the end to the frame. - Page 5 STEP 2 MOUNTING THE REAR SKI Position the rear ski inserts on either side of the ski. (1x part A & 2x part B).
- Page 6 STEP 3 MOUNTING THE FROM SKI...
- Page 7 STEP 4 CHECKING MOVEMENT Check if both ski’s sit flat on the ground. The rear ski should be rigid and not able to rotate. The front ski should be able to glide over small bumps and has a free rotation angel of 15 degree to the front and rear.
- Page 8 4 mm hexagon allen wrench (part G). Your child should always: aware a helmet, safety vest and appropriate footwear at all times while riding FirstBIKE with ski set. Ride FirstBIKE while supervised by an adult, in safe environment free from traffic and dangerous terrain.
- Page 9 2. After removing the rear ski assembly parts, cut the tie wrap holding the brake line (if applicable) 3. To fit the rear wheel, turn the FirstBIKE upside down so that it rests on the seat and handlebar. Align the frame, wheel and brake assembly (if applicable). Ensure that the tire rotation arrow matches the driving direction.