Related Manuals for M Solutions HDBaseT MS-310U1R
Summary of Contents for M Solutions HDBaseT MS-310U1R
- Page 1 User Guide MS-310U1R HDBaseT™ Extender Set - 4K to 90m (10G), 100m @ 1080p. USB 2.0 (x1) & RS-232 pass through. HDCP2.2 compliant Revision: 1.2 - Feb 2021...
-
Page 2: Table Of Contents
MS-310U1R USER GUIDE Contents Introduction Key Features Connectivity Overview (TX and RX) Understanding the LED’s Cabling for HDBaseT RS-232 Control Specifications & Package Contents Schematic Notices • This MSolutions product contains electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc. -
Page 3: Introduction 03
MS-310U1R USER GUIDE Introduction The MSolutions MS-310U1R is a 4K HDMI / KVM HDBaseT extender set allowing for uncompressed video and audio to be extended up to 90m at 4K UHD (10.2Gbps), and 100m at 1080p or lower resolutions. A single USB2.0 channel allows for bi-directional USB client to host connectivity for a variety of applications. -
Page 4: Connectivity Overview (Tx And Rx) 04
MS-310U1R USER GUIDE Connectivity Overview - TX Front panel: • HDBaseT Out - connect to Cat cable to receiver • USB Host - connect to USB host device • HDMI In - connect to HDMI source Rear panel: • RS-232 - use supplied 3-pin phoenix connector to connect to serial device •... -
Page 5: Understanding The Led's
MS-310U1R USER GUIDE Understanding the LED’s This MSolutions extender set includes status LED indicators on both the Transmitter and Receiver products to show active connections and to further help integrators diagnose potential problems with the associated cabling. The RJ45 HDBaseT connections on both the transmitter and receiver units have orange and green LED’s. -
Page 6: Usb 06
MS-310U1R USER GUIDE This KVM extender combines USB2.0 connectivity with video and audio to be passed between host on the transmitter side (Type A to Type A USB cable - supplied), to a peripheral device on the receiver side of the link only (no host at the RX). The USB type A connections on the Receiver can be used to connect a USB2.0 camera, touch screen, smart board, hard drive, games controller, USB audio device, printer, scanner, or HID (mouse or keyboard) to a host device at the HDBaseT transmitter. - Page 7 MS-310U1R USER GUIDE Specifications Transmitter Receiver • Video connectivity: 1 x HDMI input (female), • Video connectivity: 1 x HDBaseT input (RJ45 1 x HDBaseT output (RJ45 keystone) keystone), 1 x HDMI output (female) • USB connectivity: 1 x USB type A (female) •...
-
Page 8: Schematic 08
MS-310U1R USER GUIDE Schematic... - Page 9 www.m4sol.com...