Receiving Calls - Sony SPP-A941 Operating Instructions Manual

Receiving calls

TALK/BATT
LOW lamp
VOL
switch
(*TONE)
Additional tasks
To
Select a better channel
Adjust the handset
volume
Switch to tone dialing
temporarily
Switch to another call
("call waiting" service*)
*Contact your telephone company to subscribe to this service.
16 US
Basics
1
When you hear the phone ring;
• Press (TALK/FLASH)
(or any key except (OFF)) .
• Pick up the handset from the base
unit when the handset is placed on
the base unit.
(CHANNEL)
The TALK/BATT LOW lamp lights up
at the same time the IN USE lamp on
the base unit lights up.
2
When you're done talking, press
(OFF) or replace the handset on the
base unit.
The TALK/BATT LOW and IN USE
lamps go off.
Do this
Press (CHANNEL).
Set the VOL switch to H (high), M (middle) or L
(low).
Press (*TONE) while using the telephone after
you're connected. The line remains in tone dialing
until disconnected.
Press (TALK/FLASH) to access the flash function.
Press (TALK/FLASH) again to return to the first
caller.
or