Advanced Settings Configuration; Light Settings; Adjust Brightness; Light Linkage - Pyronix LIGHTCAMERA User Manual

ADVANCED SETTINGS CONFIGURATION

LIGHT SETTINGS

ADJUST BRIGHTNESS

Step 1
Select 'Adjust Brightness' .

LIGHT LINKAGE

Step 1
If the light linkage slider
is disabled, enable it by
tapping the slider then
tap the 'Light Linkage
Area Settings' .
Please note: This section defines the area that causes the PIR sensor to trigger the flood lights.
12
Step 2
Use the slider to adjust how bright
the flood lights are when activated.
Step 2
This screen shows the
current detection zone
which will trigger the
flood lights to illuminate.
LIGHTCAMERA USER GUIDE
Step 3
Select the ‹ icon in the top left
corner to return to the previous
menu.
Step 3
The detection area can
be edited by tapping the
zones. Blue areas are still
active.
Step 4
Once the detection area
is finalised, click 'save' .