1. Manuals
  2. Brands
  3. Hubbel Manuals
  4. Amplifier
  5. GAI-TRONICS SP2 Fiber
  6. Manual

Hubbel GAI-TRONICS SP2 Fiber Manual

For handset/speaker
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Confidentiality Notice .....................................................................................................................1
General Information .......................................................................................................................1
Product Overview ................................................................................................................................... 1
Features .................................................................................................................................................... 2
Options ..................................................................................................................................................... 2
Installation ......................................................................................................................................3
Important Safety Instructions................................................................................................................ 3
Enclosure Mounting and Cable Entries ................................................................................................ 4
Open the Station ...................................................................................................................................... 5
Field Wiring and Configuration ............................................................................................................ 5
Station Ground ...................................................................................................................................... 5
Termination PCBA ............................................................................................................................... 6
Main PCBA-600-Ohm Audio I/O with Control ............................................................................... 11
Fiber Termination Board ..................................................................................................................... 12
Settings and Adjustments ..............................................................................................................13
Open the Station .................................................................................................................................... 13
Main PCBA Configuration .................................................................................................................. 14
Write Protect (EEPROM) Jumper ....................................................................................................... 14
WDOG Enable (Watchdog) Jumper ................................................................................................... 14
Boot Enable Jumper ............................................................................................................................ 14
Reset Switch ........................................................................................................................................ 14
Speaker and 600-ohm Audio Output Volume ..................................................................................... 15
Receiver Volume ................................................................................................................................ 15
Group and Station Number Selector Switches .................................................................................... 16
Main PCBA Indicators ......................................................................................................................... 16
Power LED .......................................................................................................................................... 16
Heartbeat LED .................................................................................................................................... 16
Ethernet Connection LEDs ................................................................................................................. 16
Five Configurable LEDs ..................................................................................................................... 16
Front Cover Installation ....................................................................................................................... 16
Programming ................................................................................................................................16
Operation .......................................................................................................................................17
Standard Handset Paging ..................................................................................................................... 17
GAI-TRONICS 3030 KUTZTOWN RD. READING, PA 19605 USA
610-777-1374 ◼ 800-492-1212 ◼ Fax: 610-796-5954
V
ISIT WWW
G A I - T R O N I C S
A H U B B E L L C O M P A N Y
T
A B L E O F
.
-
.
GAI
TRONICS
COM FOR PRODUCT LITERATURE AND MANUALS
®
C
O N T E N T S
Pub. 42004-790B

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GAI-TRONICS SP2 Fiber and is the answer not in the manual?

Questions and answers

Related Manuals for Hubbel GAI-TRONICS SP2 Fiber

Summary of Contents for Hubbel GAI-TRONICS SP2 Fiber

  • Page 1: Table Of Contents

    Pub. 42004-790B G A I - T R O N I C S ® A H U B B E L L C O M P A N Y SP2 Fiber Class I Div. 2 Handset/Speaker Amplifier Station A B L E O F O N T E N T S Confidentiality Notice ........................1 General Information ........................1...
  • Page 2 Table of Contents Pub. 42004-790B Party Line Communication ........................17 All-Call Button Use ..........................18 Alternate-Page Destination Switch Use ....................19 Headset Use............................19 Maintenance ..........................20 Troubleshooting ............................ 20 Service and Spare Parts ........................21 Reference Documentation ......................21 Specifications ..........................21 Power ..............................

  • Page 3: Handset/Speaker Amplifier Station

    Pub. 42004-790B G A I - T R O N I C S ® A H U B B E L L C O M P A N Y SP2 Fiber Class I Div. 2 Handset/Speaker Amplifier Station Confidentiality Notice This manual is provided solely as an installation, operation, and maintenance guide and contains sensitive business and technical information that is confidential and proprietary to GAI-Tronics.

  • Page 4: Sp2 Fiber Class I Div

    Pub. 42004-790B SP2 Fiber Class I Div. 2 Handset/Speaker Amplifier Station Page 2 of 24 Features • flexible and highly configurable SMART technology featuring ALS (ambient level sensing), real time self-diagnostics, and available remote monitoring • real-time operation providing instantaneous page and party line communication •...

  • Page 5: Installation

    Pub. 42004-790B SP2 Fiber Class I Div. 2 Handset/Speaker Amplifier Station Page 3 of 24 Installation Important Safety Instructions • Read, follow, and retain instructions—Read and follow all safety and operating instructions before installing or operating the unit. Retain instructions for future reference. •...

  • Page 6: Enclosure Mounting And Cable Entries

    Pub. 42004-790B SP2 Fiber Class I Div. 2 Handset/Speaker Amplifier Station Page 4 of 24 Enclosure Mounting and Cable Entries The mounting location must be flat and provide proper clearance, rigidity, and strength to support the enclosure and all contained devices.

  • Page 7: Open The Station

    Pub. 42004-790B SP2 Fiber Class I Div. 2 Handset/Speaker Amplifier Station Page 5 of 24 Open the Station Complete the following steps to open the station: 1. Remove the four screws from the front panel and turn it to the left to expose the interior surfaces. 2.

  • Page 8: Termination Pcba

    Pub. 42004-790B SP2 Fiber Class I Div. 2 Handset/Speaker Amplifier Station Page 6 of 24 Termination PCBA Install all connections as indicated in the following sections: Figure 4. SP2 Termination PCBA (Optional 70V/100V Termination PCBA Similar) Direct Speaker Connection and Jumper Settings Terminal block TB1 provides termination for the station’s 8 or 16-ohm remote speaker(s).
  • Page 9 Pub. 42004-790B SP2 Fiber Class I Div. 2 Handset/Speaker Amplifier Station Page 7 of 24 Table 1. Direct Speaker Connections—TB1 Label Description TB1-1 Parallel/S A Series—Output PEAKER ⏚ TB1-2 Earth Reference TB1-3 − Parallel/S A Series—Output PEAKER B Series—Output TB1-4 Parallel/S PEAKER ⏚...
  • Page 10 Pub. 42004-790B SP2 Fiber Class I Div. 2 Handset/Speaker Amplifier Station Page 8 of 24 70-V/100-V Termination Board Option—Speaker Connections with Monitoring The optional 70-volt/100-volt speaker line- monitoring PCBA replaces the standard termination board and enables connection of 70-volt and/or 100-volt speakers to the SP2 station.
  • Page 11 Pub. 42004-790B SP2 Fiber Class I Div. 2 Handset/Speaker Amplifier Station Page 9 of 24 RTU Inputs The standard termination PCBA contains two auxiliary RTU inputs. The optional 70V/100V termination board provides speaker line monitoring and has just one auxiliary RTU input. Terminate the input(s) at terminal block TB2 (see Figure 4).
  • Page 12 Pub. 42004-790B SP2 Fiber Class I Div. 2 Handset/Speaker Amplifier Station Page 10 of 24 RTU Output Two form C contacts are provided to power a beacon (see Figure 8). Terminate the output at terminal block TB2 (see Figure 4). Configure the output for dry contact use by removing jumpers JU1 and JU2. WARNING —Line voltage is present at the NO contact until JU1 and JU2 are removed.

  • Page 13: Main Pcba-600-Ohm Audio I/O With Control

    Pub. 42004-790B SP2 Fiber Class I Div. 2 Handset/Speaker Amplifier Station Page 11 of 24 Power The ac or optional dc power supply is on the termination PCBA. Connect the local ac or dc power source to terminal block TB3 (see Figure 4, Figure 5, and Figure 6): 1.

  • Page 14: Fiber Termination Board

    Pub. 42004-790B SP2 Fiber Class I Div. 2 Handset/Speaker Amplifier Station Page 12 of 24 Figure 9. SP2 Main PCBA (Fiber) Fiber Termination Board The fiber termination PCBA is mounted on top of the main PCBA(see Figure 3). Exact fiber termination is installation dependent because the fiber optic cable and SFP (Small Form-factor Pluggable) transceivers used in SP2 system installations are customer supplied.

  • Page 15: Settings And Adjustments

    Pub. 42004-790B SP2 Fiber Class I Div. 2 Handset/Speaker Amplifier Station Page 13 of 24 Figure 11. SFP Transceiver Insertion and Fiber Plug-in Settings and Adjustments Open the Station Complete the following steps to open the station: 1. Remove the four screws from the front panel and turn it to the left to expose the interior surfaces. 2.

  • Page 16: Main Pcba Configuration

    Pub. 42004-790B SP2 Fiber Class I Div. 2 Handset/Speaker Amplifier Station Page 14 of 24 Main PCBA Configuration Refer to Figure 13 for switch, jumper, and LED locations on the main PCBA. Write Protect (EEPROM) Jumper : Do not change this jumper in the field. WDOG Enable (Watchdog) Jumper Watchdog jumper, P11, is for software purposes only.

  • Page 17: Speaker And 600-Ohm Audio Output Volume

    Pub. 42004-790B SP2 Fiber Class I Div. 2 Handset/Speaker Amplifier Station Page 15 of 24 Speaker and 600-ohm Audio Output Volume The speaker volume potentiometer, R36, adjusts the signal level to the speaker from the page line. When 600-ohm audio is also connected, R36 adjusts the volume for both. Use the CLI (Command Line Interface) to configure the output level when using 600-ohm audio without external speakers.

  • Page 18: Group And Station Number Selector Switches

    Pub. 42004-790B SP2 Fiber Class I Div. 2 Handset/Speaker Amplifier Station Page 16 of 24 Group and Station Number Selector Switches One group-number and two station-number hex-selector switches configure SP2 stations for mutual provisioning (see Figure 13). Each hex switch has a small arrow that indicates the current setting. 1.

  • Page 19: Operation

    Pub. 42004-790B SP2 Fiber Class I Div. 2 Handset/Speaker Amplifier Station Page 17 of 24 Operation Standard Handset Paging Complete the following steps to make a page announcement from an SP2 handset station: 1. Lift the handset from the cradle. 2.

  • Page 20: All-Call Button Use

    Pub. 42004-790B SP2 Fiber Class I Div. 2 Handset/Speaker Amplifier Station Page 18 of 24 All-Call Button Use Use the A button to page an alternate destination that is programmed for the station (see Figure 14). The A option must be software configured for the SP2 station.

  • Page 21: Alternate-Page Destination Switch Use

    Pub. 42004-790B SP2 Fiber Class I Div. 2 Handset/Speaker Amplifier Station Page 19 of 24 Alternate-Page Destination Switch Use Use the A selector switch to page one of five alternate destinations programed for the station (see Figure 15). Alternate page destinations must be software configured for SP2 stations.

  • Page 22: Maintenance

    Pub. 42004-790B SP2 Fiber Class I Div. 2 Handset/Speaker Amplifier Station Page 20 of 24 Maintenance Troubleshooting The following table provides aid for qualified service personnel in troubleshooting problems with an SP2 station. Problem Solution • station not functional check wiring and cable terminations •...

  • Page 23: Service And Spare Parts

    Pub. 42004-790B SP2 Fiber Class I Div. 2 Handset/Speaker Amplifier Station Page 21 of 24 Service and Spare Parts Contact GAI-Tronics’ regional service center if the equipment requires service or spare parts. An RA# (Return Authorization Number) will be issued if service is required. Ship equipment prepaid to GAI- Tronics with an RA# and a purchase order number.

  • Page 24: Ethernet

    Pub. 42004-790B SP2 Fiber Class I Div. 2 Handset/Speaker Amplifier Station Page 22 of 24 Ethernet Cable .....................fiber optic cable (customer supplied) Fiber optic transceiver ................100 Mbps SFP (customer supplied) Supply voltage ........................... 3.3 V dc Supply current ............................ 300 mA Power dissipation .............................

  • Page 25: Mechanical

    Pub. 42004-790B SP2 Fiber Class I Div. 2 Handset/Speaker Amplifier Station Page 23 of 24 adjustable to 15 W; default: 2 W @ 16 Ω Frequency response ................250–3,000 Hz, +0/−3 dB ref. to 1 kHz Distortion ......................<1% THD @1 kHz to 24 W <3% THD @ 1 kHz to 30 W 70V/100V Speaker Output Maximum output ............................

  • Page 26: Approvals

    Pub. 42004-790B SP2 Fiber Class I Div. 2 Handset/Speaker Amplifier Station Page 24 of 24 Approvals NRTL Listed for USA and Canada ..........Class 1, Groups A, B, C, and D, Division 2 Class II, Groups F and G, Division 2 Class III, Division 2 Hazardous Locations Temperature Code T4 P:\Standard IOMs - Current Release\42004 Instr.
  • Page 27 Warranty Equipment. GAI-Tronics warrants for a period of one (1) year from the date of shipment, that any GAI-Tronics equipment supplied hereunder shall be free of defects in material and workmanship, shall comply with the then-current product specifications and product literature, and if applicable, shall be fit for the purpose specified in the agreed upon quotation or proposal document.

Table of Contents