morse 15 Operator's Manual

The Specialist In Drum Handling Equipment
Receiving Procedures. . . . . . . . . . . . . . . . .
Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety Information. . . . . . . . . . . . . . . . . . . . . 1 - 2
Parts Lists and Diagrams. . . . . . . . . . . . . . . . .
IMPORTANT:
1. Review the Material Safety Data Sheet(s) for the material(s) in the
can(s) and take all necessary precautions. Safety shoes, work
gloves, hard hat and other personal protective devices are recom-
mended.
2. Please read all instructions thoroughly before attempting to operate
your new MORSE Can Tipper.
3. The model 15 is designed to pour a 5-gallon can weighing up to 75
Lb. DO NOT exceed these ratings. Exceeding these ratings or
handling cans other than those mentioned above is unsafe and
could result in equipment damage or excessive wear.
4. When loading, unloading, operating, or maintaining your MORSE
Can Tipper, always use care and good judgment. Maintain secure
footing and a firm hold. Keep hands and loose clothing away from all
moving parts. Read operating instructions and review the pictures in
the sales brochure before operation.
Receiving Procedures
Every Morse product is inspected prior to shipping. However, damage
may be incurred during transit.
• Check for visible damage. If you choose to accept damaged freight,
always sign noting the damage on the BILL OF LADING.
• Document the damage and have the truck driver sign. We recommend
keeping a digital camera at your receiving dock for this purpose.
• Open packages expeditiously to check the condition of the goods. There
is only a 24 hour window to notify the carrier of any concealed damage.
• IMMEDIATELY REPORT ALL DAMAGE TO THE SHIPPING
COMPANY! Then you may contact Morse for assistance with your
freight claim.
• Morse Manufacturing will not be held responsible for any damaged
freight that is not signed for as damaged.
Delivery to non-business addresses without a loading dock result in
additional freight charges. Residential delivery fees, inside delivery fees,
re-delivery charges, and lift gate services will be added by the truck line,
and are non-negotiable.
Limited 2 Year Warranty
Morse drum handling equipment is guaranteed against defects in
workmanship or materials for TWO YEARS when used properly within
its rated capacity. Warranty does not cover wear from normal use or
damage from accident or abuse. Motors and other purchased parts carry
the warranties of their manufacturers.
MORSE MFG. CO., INC.
Phone: 315-437-8475 •
COPYRIGHT 2006 MORSE MFG. CO., INC.
Contents
• 727 West Manlius Street
Fax: 315-437-1029 •
Form PL 15 (0506)
Operator's Manual
for Morse Can Tipper Model 15
Page
Manufactured 05/2006 to _______
1
3
For warranty claims, contact your Morse Dealer to obtain a
return authorization number, and for return freight advice. Return freight
must be prepaid.
In all instances, liability is limited to the purchase price paid or to repairing
or replacing the product. Customer assumes liability for any
modifications, unauthorized repairs or parts substitution.
Safety Information
While Morse Manufacturing Co. equipment is engineered for safety and
efficiency, a high degree of responsibility must be placed upon the machine
operator to follow safe practices, based primarily on common sense,
upon which true safety depends.
Failure to follow the safety precautions in this manual can result in
personal injury or property damage. Observe the same precautions as
with similar machinery where carelessness in operating or maintenance
is hazardous to personnel. Carefully read the safety precautions below
and throughout this manual.
• P.O. Box 518
Email: service@MORSEmfgco.com
MODEL 15
CAN TIPPER
• East Syracuse, NY 13057-0518
• Website: www.MORSEmfgco.com
(Updated 10/2006) Page 1