Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Egardia Bell box
Summary of Contents for Egardia Bell box
- Page 1 Bell box...
- Page 2 Confirmation sounds The bell box can be set to beep to confirm the alarm system has been turned on or off. Also the bell box can be set to beep during the delay period. These confirmation sounds are deactivated by default.
- Page 3 (Online) are lit green. Place the bell box on a flat surface. Remove the safety screw at the bottom of the bell box and remove the cover. Press the "Reset" button at the side of the gateway for at least 5 seconds. The top indicator light (Status) of your gateway flashes green to indicate it is searching for new accessories.
- Page 4 Egardia gateway. STEP 3: MOUNT BELL BOX Place the bell box in a highly visible location on the exterior wall. Before mounting use the key fob to test the desired mounting place is within range of the gateway.
- Page 5 MAINTENANCE Batteries The bell box is powered by four 1,5V D alkaline batteries. Depending on use, the average life of the battery is 2-4 years. The bell box itself will indicate when the battery is low. When the battery has...
- Page 6 A – Audible and light signals bell box B – DIP switches bell box APPENDIX A: SOUND AND LIGHT SIGNALS BELL BOX The table below lists the various types of sound and light signals the bell box can emit. No delay time set Sound signal Light signal Activate –...
- Page 7 APPENDIX B: DIP SWITCHES BELL BOX The Egardia bell box features 7 DIP switches that allow you to adjust the operation of the bell box. Here below you will find an overview of the operation of the various DIP switches.
Need help?
Do you have a question about the Bell box and is the answer not in the manual?
Questions and answers