Inventory - Grizzly G0572 Owner's Manual

Inventory

The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Box 1 (Figures 4 & 5)
A. Model G0572 Hanging Air Filter ................. 1
B. Secondary Filter (1-Micron, Bag-Type) ...... 1
C. Primary Filter (5-Micron, Pleated-Type) ..... 1
D. AAA Batteries ............................................ 2
E. Rubber Feet ............................................... 4
F. Hand-Held Remote Control Unit ................ 1
G. Flange Brackets ......................................... 4
H. Eye Bolts M6-1 x 20 ................................... 4
I.
Hex Wrench 5mm ....................................... 1
J.
Hex Wrench 4mm ....................................... 1
K. Hex Bolts M6-1 x 8 ..................................... 8
L. Flat Washers 6mm ..................................... 8
M. Lock Washers 6mm.................................... 8
Model G0572 (Mfd. Since 01/21)
B
Figure 4. Model G0572 and filters.
D
Qty
F
I
D
Figure 5. Remote control and mounting
A
C
E
G
K
J
hardware.
H
M
L
-13-