Xylem YSI Nile MB Mounting Instructions

Nile radar mounting bracket

MOUNTING INSTRUCTIONS

NILE RADAR MOUNTING BRACKET

Item # Nile MB

Thank you for purchasing the new WaterLOG Nile radar level sensor! These are the mounting

instructions for the Nile Radar Mounting Bracket. For more detailed information regarding the Nile

radar sensor visit

www.waterlog.com/nile.

feedback about our products and services. We truly value your input.

What's In The Box

Please contact YSI customer service immediately if any

expected items listed are not in the box.

Standard Items

Pole Bracket

Radar Bracket

2 in. U-bolt

2.5 in. U-bolt

Silicone O-Rings

5/16-18 x 3/4 in. Carriage Bolts

5/16 in. Washers

5/16-18 Locking Nuts

Note: This bracket has been designed for use with either horizontal or vertical mounting poles of

either 2 or 2.5 inches in diameter. Instructions for assembly in either configuration are the same,

with the orientation of the brackets being the only difference as shown in the images below.

Nile Mounting Bracket Horizontal

Please contact us at any time with your comments and

Quantity

Nile Radar Sensor Mounting Bracket Kit

Nile Mounting Bracket Vertical

Table of Contents

Need help?

Do you have a question about the YSI Nile MB and is the answer not in the manual?

Page 1 MOUNTING INSTRUCTIONS NILE RADAR MOUNTING BRACKET Item # Nile MB Thank you for purchasing the new WaterLOG Nile radar level sensor! These are the mounting instructions for the Nile Radar Mounting Bracket. For more detailed information regarding the Nile radar sensor visit www.waterlog.com/nile.
Page 2 Remove Retaining Bracket Begin by removing the Wire nut retaining bracket and the 2 Wire Routing Nuts from the radar body. (Be sure that the Attached o-rings stay in place on the Wire Routing Notes as shown). Note: Any wires that have been routed through the wire nuts and connected to electronics within the radar body will have to be disconnected and re- moved until installation of the bracket is completed.
Page 3 Reinstall Wire Routing Nuts Reinstall the Wire Routing Nuts into the Radar Body and tighten until the bracket plate is secure. (Pay special attention to not deform the silicone O-rings through over tightening so as to retain the water resistant qualities of the radar.) Reinstall Wire Routing Nuts Mount Pole Bracket To Bracket Plate Mount the Pole Bracket to the Bracket Plate using...
Page 4 150 countries, we have strong, long-standing relationships with customers who know us for our powerful combination of leading product brands and applications expertise, backed by a legacy of innovation. For more information on how Xylem can help you, go to www.xyleminc.com Xylem—YSI 1700/1725 Brannum Lane...