APW Wyott HDDS-1B Specifications

PRODUCT: QUANTITY:
Designed Smart
Developed for High Performance!
• The APW Wyott Built-In Holding Drawers are designed to hold
all "potentially hazardous foods" at required NSF temperatures.
• Heating system is designed to provide fast start-ups, quickly
heating to temperatures up to 200 degrees.
• Thermometer in control panel accurately reflects temperature
in drawer area. Operators can achieve the optimal holding
condition that keeps food safe but does not over-heat food
product.
Maximum Versatility!
• Perimeter heating elements distribute heat evenly through
the drawer area, allowing for maximum control of your
temperature needs.
• Handles Crispy or Moist food equally well by using adjustable
louvers on each drawer. This feature retains the ideal moisture
level in the compartment.
• Drawers can handle a variety of Pan insert sizes or be utilized
directly without inserts, utilizing 12 x 20 x 6 1/2" pan liner provided.
6 1/22
Energy Efficient!
• Top and side panels are built with 1-inch fiberglass insulation pads.
• Insulation keeps heat in and keeps exterior panels "cool to
the touch."
Easy to Maintain and Service!
• Removable pan allows for quick clean up of drawer area.
• Front mounted control panel is easy to access and service.
Built Solid
Built to Last
• Exterior is built with heavy-duty stainless steel to protect
against kitchen wear and rust.
• Drawers are constructed with reinforced 14 gauge stainless
steel drawer slides. Will not bend or warp drawer tracking
system.
• 85% increase in drawer bracket support. Drawer Roller
brackets re-inforced by two 16 gauge stainless steel plates.
• Drawers have built-on horizontal stainless steel handles.
Reliability backed by APW Wyott's Warranty
• All APW Wyott holding drawers are backed by a 1-year parts
and labor warranty, including on-site service calls within 50
miles of authorized service technicians.
• Certified by the following agencies:
APW Wyott Foodservice Equipment Company · 729 Third Ave., Dallas, TX 75226
(800) 527-2100 · (214) 421-7366 · Fax (214) 565-0976 · www.apwwyott.com · info@apwwyott.com
Models: HDDS-1B
ITEM #:
APW Wyott Design Features
• Heavy-duty stainless steel with 1" fiberglass insulation.
• 14 gauge stainless steel drawer slides.
• Each drawer individually controlled by a protected
thermostat, indicatior lamp and rolling read-out thermometer.
• Temperature range of 100° - 200°F (38°C - 93°C).
• Adjustable louvers on each drawer.
• Each drawer has removable 12"x20"x6 1/2" deep stainless
steel liner pan.
• Built-Ins have a Terminal Block for quick installation.
Options
• Perforated well-pan bottom (14900)
• Full and fractional size steamtable pans up to 6" deep
Standard & Slimline
Built-In Holding Drawers
HDDS-2B HDDS-3B HDDS-1B
See reverse side for product specifications.
HDDS-2B HDDS-3B
Built-In Holding Drawer
Rev. 5/22/2005