Advertisement
Usage
Quick removal and installation of the spring holder, which can then be opened and closed
through the large openings on both sides of the pressure pipe.
Quickly and easily replace tapered collets on recessed valve springs. The special spring-
loaded unit brings the adjusting ring immediately into position above the cylinder heads.
Suitable for 8 V, 16 V and 24 V
By applying air to the cylinder through the spark plug hole, valve seals, as well as broken and
weak valve springs can be replaced without removing the cylinder head.
One end of the tool fits on 14 mm and 18 mm thread of the spark plug hole. The other end of
the tool is suitable for 1/4" NPT female threads.
The long hose is ideal for reaching deep spark plug holes.
Compressed air adapter for 14 mm and 18 mm spark plugs, 4 x thread 1/4" air coupling
Hold the valve in place with compressed air to allow maintenance of the valve stem oil seals/
valve springs with the cylinder head in place.
Removes valve stem seals from overhead camshaft engines.
Pliers grip around the valve stem into the narrow area of the seal to grip and remove it.
The "gripping" gear in the tip allows to grip both original parts and gasket spare parts
regardless of their configuration.
A press fit holds the tool in place so that it can be lowered in the narrow areas of the valve
guide and thus easily tapped with manual pressure.
There are a total of 6 sizes: 5 mm, 6 mm, 7 mm, 8 mm, 10 mm and 11.5 mm.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
March 2020
Version
33
Seite 4
Advertisement
