Advertisement
VocalFusion Stereo Dev Kit Quick Start Guide
5. Connect the xTAG debug adaptor to the dev kit using the XSYS DEBUG socket.
6. Flash the XVF3500 firmware binary on to the dev kit.
Windows users:
Open an xTIMEcomposer command prompt:
Navigate to your folder containing the downloaded firmware binary and enter:
Mac users:
Open an xTIMEcomposer terminal session and run:
Navigate to your folder containing the downloaded firmware binary and enter:
7. Wait for the flashing process to complete. When complete, the dev kit will
re-enumerate as a composite USB Audio Class 1 device.
8. All done! You may now close the xTIMEcomposer command prompt and unplug
the xTAG debug adaptor from both the PC and the dev kit.
Copyright © 2018, All Rights Reserved.
Xmos Ltd. is the owner or licensee of this design, code, or Information (collectively, the "Information") and
is providing it to you "AS IS" with no warranty of any kind, express or implied and shall have no liability in
relation to its use. Xmos Ltd. makes no representation that the Information, or any particular implementation
thereof, is or will be free from any claims of infringement and again, shall have no liability in relation to any
such claims.
XM012531A
Start
XMOS
Command Prompt
xflash --no-compression <filename>.xe
Finder
Applications
xflash --no-compression <filename>.xe
XMOS_xTIMEcomposer
8/8
SetEnv.command
Advertisement
