Advertisement
VocalFusion Stereo Dev Kit Quick Start Guide
2 Setting up the VocalFusion Stereo Dev Kit
For performance that will be representative of real-world conditions the following
setup is recommended:
1. Place the VocalFusion Stereo Dev Kit on a horizontal surface. For example, on a
table towards the edge of the room.
2. Place the powered speakers in the near-field next to (within 30cm) and behind
the VocalFusion Stereo Dev Kit. Avoid pointing the speakers directly at the
microphone array.
3. Connect the powered speakers to the 3.5mm 1-2 MAIN socket on the VocalFu-
sion Stereo Dev Kit.
4. Connect the VocalFusion Stereo Dev Kit to the host PC, using the supplied USB
A to Micro B cable.
5. All done! The VocalFusion Stereo Dev Kit is now ready to use.
XM012531A
3/8
Advertisement
