Advertisement
Quick Links
Figure 1.
Specifications
Size ..................................... 38"L x 28"W x 39"H
Top Shelf Capacity ..................................150 lbs.
Bottom Shelf Capacity . ........................... 600 lbs.
Clearance Between Shelves .......................... 25"
Weight .......................................................64 lbs.
Items Required for Assembly
Pliers . ................................................................. 1
Wrench or Ratchet 12mm . ................................. 1
Wrench or Ratchet 13mm . ................................. 1
Wrench 19mm ................................................... 1
If you need help with your new item, call our Tech
Support at: (570) 546-9663.
WARNING: NO pORTION OF ThIS MANUAL MAy bE REpRODUCED IN ANy ShApE
OR FORM WIThOUT ThE WRITTEN AppROvAL OF GRIzzLy INDUSTRIAL, INC.
Model T23120.
CoPyRigHT © DeCeMBeR, 2010 By gRizzLy inDuSTRiaL, inC.
#JB13584 PRinTeD in CHina
MODEL T23120
STEEL FOLDING CART
INSTRUCTIONS
• Never carry people or animals in the
cart.
• Do not allow children to play on or
around the cart.
• Do not exceed the capacities listed for
the cart
• Do not attempt to modify the cart to
increase load capacity.
• Do not load the cart in a manner where
the cart will become top heavy and fall
over when pulling/pushing.
• Do not use the cart on a steep incline.
• Regularly inspect the cart for loose
hardware, cracks, or any other signs of
damage. If any are found, remedy the
problem before using the cart again.
Wear safety glasses dur-
ing the entire setup pro-
cess!
Advertisement
Related Manuals for Grizzly T23120
Summary of Contents for Grizzly T23120
- Page 1 If you need help with your new item, call our Tech problem before using the cart again. Support at: (570) 546-9663. CoPyRigHT © DeCeMBeR, 2010 By gRizzLy inDuSTRiaL, inC. WARNING: NO pORTION OF ThIS MANUAL MAy bE REpRODUCED IN ANy ShApE OR FORM WIThOUT ThE WRITTEN AppROvAL OF GRIzzLy INDUSTRIAL, INC. #JB13584 PRinTeD in CHina...
- Page 2 Discard immediately. NOTICE If you cannot find an item on this list, check the mounting location on the machine or the packaging materials. Sometimes parts are pre-installed for shipping, or they become hidden by packaging materials. Hardware inventory. Figure 4. T23120 Steel Folding Cart...
- Page 3 Assembly 4. attach the bottom shelf to the main frame with (2) M8-1.25 x 60 hex bolts, (4) 8mm The Model T23120 requires assembly. Before flat washers, and (2) M8-1.25 lock nuts, as starting, place a sheet of cardboard or other pro- shown in Figure 7. tective material on the floor to reduce the likeli- hood of damaging the finish during assembly.
- Page 4 Figure 9. install the remaining wheel on the other side of the axle using the method from Step 8. 10. attach the handle to the main frame with (4) M8-1.25 x 60 hex bolts, (8) 8mm flat wash- ers, and (4) M8-1.25 lock nuts, as shown in Figure 12. Fully tighten the hardware. Main Frame Handle Figure 10. Installing caster. Figure 12. Attaching the handle. T23120 Steel Folding Cart...
- Page 5 Storage 11. attach the wire hook to one of the sides, as shown in Figure 13. This hook is used to The Model T23120 can be folded to save space secure the sides together when the cart is when it is not in use. folded for storage. To fold the cart for storage: 1. Lift the top shelf and rotate the support tabs outward so the shelf can be folded down, then...
- Page 6 HEX BOLT M8-1.25 X 50 PT23120007 WIRE HOOK PB28M HEX BOLT M8-1.25 X 60 PT23120008 TOP SHELF PT23120019 RIGHT SIDE PANEL PT23120009 BOTTOM SHELF PW08M FLAT WASHER 16MM PT23120010 SHELF RETAINING CLIP PT23120021 TOP SHELF TAB PB164M HEX BOLT M8-1.25 X 70 T23120 Steel Folding Cart...