APW Wyott HR-20 Specifications

Hot rod flat surface roller grill

Advertisement

Equipment Packages to fit your operations

• Available in a variety of sizes to fit your counter space:
• Compact HR(S)-20 (11 rollers and 13" cooking surface across)
• Regular size HR(S)-31 (11 rollers and 19 1/2" cooking surface across)
• Full Menu sizes HR(S)-50 (11 rollers and 30 1/2" cooking surface across),
and HR(S)-85 (18 rollers and 34" across)
• Available in Chrome or New "Tru-Turn" textured rollers.
• Unit is designed to be used in a "clerk served" operation or in a
customer "self-serve" merchandising plan. For counters between
clerk and customer, the Flat Roller Grill is available with
reversible "rear controls" and a "pass-through" sneeze guard.

Designed to deliver great tasting Hot Dogs

• Roller Grill heats quickly and has a fast recovery for unexpected
surges in demand.
• Heating system has two cooking zones that can be turned to Grilling
temperatures for cooking Hot Dogs in less than 4 minutes* and
turned down to NSF-safe holding temperatures for serving customers.
• HR(S)-20 flat Equipment can grill 340 Hot Dogs per hour.
• HR(S)-31 flat Equipment can grill 510 Hot Dogs per hour.
• HR(S)-50 flat Equipment can grill 850 Hot Dogs per hour.
*Grill times based on Pre-heated roller grill (about 10 minutes warm up cycle).

Easy to Operate and Maintain

• "Easy to read" graphics and heavy duty knobs on the control panel
make it easier for employees to operate at the correct temperatures.
• Infinite Control system gives operator the maximum ability to adjust
temperatures to a variety of hot dogs, sausage, egg roll, or other roll
type products.
• Roller Grill is designed to require minimal labor:
• New "Tru-Turn" coated rollers just wipe clean with damp rag.
• Raised rollers allow cleaning in "hard to reach" areas.
• Removable grease collection pan is simple to clean.
• Easiest Roller Grill in the industry to service:
• Unit is supplied with "easy to remove" side and bottom panels.
• Dependable, high torque motor is one of the most dependable in
the industry.
• Warranty includes on-site repairs, reducing the amount of potential
down time.

Built for Long Life!

• Exterior cabinet is constructed of stainless steel for maximum durability.
• Made with heavy duty wiring.
• "Tru-Turn" coating is 30% thicker than competitive non-stick coatings.
• Teflon seals at end of rollers stop grease from migrating into motors
and chains.

Reliability Backed By APW Wyott's Warranty

• APW Wyott's Hot Rod Roller Equipment is backed by a 1 year limited
warranty and a one year on-site labor warranty
• Certified by the following agencies:
• 4" Metal Leg Kit
• 6" Tongs
• Polycarbonate Sneeze Guards
• Reversible controls
(Add "R" to model type)
Rev. 1/1/2003

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HR-20 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for APW Wyott HR-20

  • Page 1 • Teflon seals at end of rollers stop grease from migrating into motors and chains. Reliability Backed By APW Wyott's Warranty • APW Wyott's Hot Rod Roller Equipment is backed by a 1 year limited warranty and a one year on-site labor warranty • Certified by the following agencies: •...
  • Page 2 120V, 768W. 6.4Amps, 60Hz 120V, 985W, 8.3Amps, 60Hz 208/240V, 885/1160W, 3.2/4.8Amps 220V, 990W, 4.5Amps 120V, 1320W, 11Amps, 60Hz 208/240V, 1260/1665W, 6.2/7Amps All 120V units use a NEMA 5-15P plug that exits from the bottom on the left rear corner. Note: 7/16" space between rollers Rev.

This manual is also suitable for:

Hr-31Hr-50Hrs-20Hrs-31Hrs-50

Table of Contents