Replacing The Pedals; Wheel And Engine; Luggage Rack - wayscral EVERYWAY E-CARRIER Manual

In order to check if the length of the chain is correct, it must be put on
the small sprocket. In this configuration, the virtual line drawn between
the wheel hub of the rear wheel and the axis of the lower derailleur
pulley should be vertical.

6. Replacing the pedals

To change your pedals, identify the pedals by looking at the letter noted
on the pedal. The right pedal is marked "R" (Right) and the left pedal is
marked "L" (Left). Turn the pedal R clockwise to fix it onto the crank
arm. Turn the L pedal anti-clockwise.

7. Wheel and engine

After the first month of use, it is advisable to tighten your spokes to limit
the impact of engine traction on your rear wheel. A slight noise may be
heard when the engine is started. This noise is normal because the
engine starts and assists pedalling. This noise can become louder
when in full use.

8. Luggage rack

Your bike is sold with a rear luggage rack and a front luggage rack:
Model
EVERYWAY
E-CARRIER
They are already attached above your rear wheel and your front wheel.
The fixing elements must be tightened and checked regularly at a
torque of 4 - 6 Nm. Your rear luggage rack is designed for a maximum
load of 25 kg and a child seat can be attached to it. The front luggage
rack is designed for a maximum load of 10 kg.
WARNING: your luggage rack is not designed to pull a
trailer.
Bike size
28"
XJ-28-LC157
66
Luggage rack
Before
XJ-26-LC174
EN
Back