Programme Selection - Kenwood Mini 1150 rapid Operating Instructions Manual

Programme selection

86
Main switch
Before selecting any programmes, always turn on the main switch.
Attention:
A fter completing a wash cycle, always turn OFF your machine
using the main switch.
Spin speed switch (variable):
This switch allows you to select the required spin speed at the end of each
wash cycle. Should you wish to finish a programme without spinning, select
position no spin "
Programme selector:
Attention: Before selecting a programme, the loading door must be firmly
closed!
• Turn programme selector to „  " position
• Wait, until " 00 " stops flashing on the digital display unit
• Select the programme of your choice, with the appropriate water
temperature.
P1 whites / coloureds
P2 easy-care fabrics
P3 hand wash
P4 wool
P5 silk
P6 quick wash
Each of this programme can be combined with the press buttons
at random (see p. 88 - 89).
P7 spin dry
".
30°C - 95°C
cold - 60°C
cold (pre-set)
cold - 40°C
30°C (pre-set)
40°C (pre-set)