Table of Contents
Advertisement
___________________________________________________________
Configuring the CKM12
®
The CKM12 transmits data over an NMEA 2000
network as it is shipped from the factory. The
default device instance is "Instance 50". The default data instance whose state is reflected by the
LED's on the CKM12 is "Instance 32". The unit will pair with Maretron CLMD12 and CLMD16 to
toggle each unit's first 12 ECB's ON and OFF. If more than one CLMD12, CLMD16 or one of
each unit is on the same NMEA 2000® network the CKM12 unit will have to be configured.
Depending on desired switch control, default configuration may not work for your application and
®
custom configuration will be needed. The CKM12 is configured using Maretron N2KAnalyzer
The following describe the configurable parameters of the CKM12.
General Tab
Figure 8 – General Tab Dialog Box
CKM12 User's Manual Rev.1.1
8
Advertisement
Table of Contents
