English - HP Y8C56AA Manual

English

WARNING: To reduce the risk of electric
shock or damage to the equipment, plug
the AC adapter into an AC outlet that is
easily accessible at all times.
WARNING: To reduce potential safety
issues, only the AC adapter provided
with the product, a replacement AC
adapter provided by HP, or an AC adapter
purchased as an accessory from HP
should be used with the product.
CAUTION:
• Make sure that the cables are
undamaged. Never use a damaged cable.
• Do not modify the device or accessories,
such as changing the electronics or
manipulating components or the housing.
• Make sure that the device is set up on
a stable surface. The turntable must be
horizontal to be sure of safe and reliable
operation.
• Do not try to rotate the turntable by hand.
• Do not drop the turntable. This might
cause damage to the device or an injury
to yourself.
• Use the turntable only for its intended
purpose.
• Do not deposit objects on the turntable
that exceed the permissible weight,
or objects that could leak fluids. Both
could lead to irreparable damage.
• Operate the turntable only in a dry
environment.
• Do not operate the turntable if it is
emitting smoke, unusual noises, or
smells.
• Do not continue using the turntable if
it is damaged. Contact your retailer.
HP accepts no responsibility in case of
failure to observe the above instructions;
this immediately voids your warranty.
2
Technical specification
• Operating voltage: 12 V dc
• Operating current: 1 A
• Dimensions: Ø 180 x 50 mm
• Turntable weight: 1.6 kg
• Object weight: 5 kg maximum
System requirements
• HP 3D Scan Software – Pro v5 or higher
• Windows® 10, Windows 8, or Windows 7
• 3D graphics adapter
• USB port
• Recommended: Dual-core processor,
2 Ghz, 4 GB RAM, NVIDIA or AMD graphics
processor
Light Status
Solid red The device is connected
to a computer but
not connected to the
software.
Blinking red There is an error.
Disconnect the device
from power and the
computer, and then
reconnect.
Solid green The device is connected
to a computer and the
software.
Blinking green The device is spinning.
For more information
To access the latest user guides or
manuals for your product, go to
http://www.hp.com/go/3DScanSupport,
and then select Manuals.
1
2
2
1
3
4
Install the HP 3D Scan Software. Go to http://www.hp.com/go/3DScanSupport, and
then select drivers, software & firmware. Select your scanner, select your operating
system, and then download the software.
5
Run the HP 3D Scan Software.
3
3