Midea Silent Cool 26 Pro Instruction Manual page 81

Operation
-Under this mode, you cannot select a fan speed or adjust
the temperature. The fan motor operates at LOW speed.
-Keep windows and doors closed for the best dehumidifying
effect.
-Do not put the duct to window when you can't set the
humidity level (portable without humidity sensor).
-You can set the humidity level when the unit has humidity
sensor. Please put the back duct for best dehumidification
effect, but the duct doesn't need to connect to window.
AUTO operation
-When you set the air conditioner in AUTO mode, it will
automatically select cooling, or fan only operation
depending on what temperature you have selected and
the room temperature.
-The air conditioner will control room temperature
automatically round the temperature point set by you.
-Under AUTO mode, you can not select the fan speed.
NOTE: Under AUTO mode, both the AUTO mode and the
actual operation mode indicator lights illuminate for some
models.
FAN operation
-Press the "MODE" button until the"FAN " indicator light
comes on.
-Press the "FAN SPEED" button to choose the fan speed.
The temperature can not be adjusted.
-Do not put the duct to window.
TIMER operation
-When the unit is on, press the Timer button will initiate
the Auto-off stop program, the TIMER OFF indicator light
illuminates. Press the UP or down button to select the
desired time. Press the TIMER button again within 5
seconds, the Auto-on start program is initiated. And the
TIMER ON indicator light illuminates. Press the up or down
button to select the desired Auto-on start time.
-When the unit is off, press the Timer button to initiate the
Auto-on start program, press it again within five seconds
will initiate the Auto-off stop program.
-Press or hold the UP or DOWN button to change the Auto
time by 0.5 hour increments, up to 10 hours, then at 1 hour
increments up to 24 hours. The control will count down the
time remaining until start.
-The system will automatically revert back to display the
previous temperature setting if there is no operation in a 5
seconds period.
-Turning the unit ON or OFF at any time or adjusting the
timer setting to 0.0 will cancel the Auto Start/Stop timer
program.
-When the malfunctionoccurs, the Auto Start/Stop timed
program will also be cancelled.
SLEEP/ECO operation
-Press this button, the selected temperature will increase
(cooling) or decrease(heating) by 1°C/2°F(or 1°F) 30
minutes.The temperature will then increase (cooling) or
decrease (heating) by another 1°C/2°F(or 1°F) after an
additional 30 minutes. This new temperature will be
maintained for 7 hours before it returns to the originally
selected temperature. This ends the Sleep/Eco mode and
the unit will continue to operate as originally programmed.
NOTE: This feature is unavailabe under FAN or DRY
mode.
Other features
FOLLOW ME/TEMP SENSING feature(optional)
NOTE:This feature can be activated from the remote
control ONLY. The remote control serves as a remote
thermostat allowing for the precise temperature control
at its location. To activate the Follow Me/Temp Sensing
feature, point the remote control towards the unit and
press the Follow Me/Temp Sensing button. The remote
control will send this signal to the air conditioner until
press the Follow Me/Temp Sensing button again. If the
unit does not receive the Follow Me/Temp Sensing signal
during any 7 minutes interval, the unit will exit the
Follow Me/Temp Sensing mode.
NOTE: This feature is unavailabe under FAN or DRY mode.
AUTO-RESTART(on some models)
If the unit breaks off unexpectedly due to the power cut,it
will restart with the previous function setting automatically
when the power resumes.
WAIT 3 MINUTES BEFORE RESUMING OPERATION
After the unit has stopped, it can not be restarted operation
in the first 3 minutes. This is to protect the unit. Operation
will automatically start after 3 minutes.
AIR FLOW DIRECTION ADJUSTMENT
The louver can be adjusted automatically. Adjust the air flow
direction automatically :
-When the Power is ON, the louver opens fully.
-Press the SWING button on the panel or remote controller
to initiate the Auto swing feature. The louver willl swing up
and down automatically.
-Please do not adjust the louver manually.
POWER MANAGEMENT feature(optional)
When the ambient temperature is lower than the setting
temperature for a period of time, the unit will be
automatically operate power management feature. The
compressor will stop, then the fan motor for some models
may stop. When the ambient temperature is higher than
the setting temperature, the unit will be automatically quit
the power management feature. The compressor and fan
motor run.
14