Motor Installation; Bonding The Driving Plate To The Stage - Nanomotion HR8 User Manual

2.2

Motor Installation

2.2.1 Bonding the Driving Plate to the Stage

C e ra m ic D rivin g P la te
The installation procedure consists of:
!
Bonding the Ceramic Driving plate to the stage
!
Mounting the motor
!
Grounding the motor
!
Connecting the motor to its driver
The Driving Ceramic Plate interfaces between the motor 'finger tips'
and the stage, and provides the required friction.
Bond the driving plate to the stage surface interfacing with the
motor 'finger tips', according to the instructions given in this section.
Figure 2-2: Bonding the Ceramic Driving Plate
HR8 Motor User Manual
Chapter 2. Preparation and Installation
S ta g e
2-4