Related Manuals for Hides UT-160
Summary of Contents for Hides UT-160
- Page 1 DRIVER INSTALLATION ON WINDOWS BDA VIEWER PLUS – SCAN/ PLAY/ CAPTURE TS CHECK IF DIVERSITY MODE IS WORKING Package Contents UT-160, USB 2.0 DVB-T Demodulator x1 USB extender cable x1 CD with drivers and Windows BDA Viewer+...
- Page 2 Port B Connect TWO antennas to the A & B ports. H/W installation 1. Connect UT-160 to PC USB port with or without USB extender cable. 2. Connect the DVB-T antenna (SMA connector) to UT-160. Driver Installation on Windows 1. Click on the file \Windows_Driver\DrvInstall.exe to install the driver...
- Page 3 3. If necessary , you can check if the device “IT9300 BDA Device” is listed in device manager BDA Viewer Plus – Scan/ Play/ Capture TS 1. Make sure to connect UT-160 with the antenna or coaxial cable first. Copy the folder “\BdaViewer+” on the CD to your local hard disk, say C:, D:, E: or F:…...
- Page 4 7. Or you can click on “Frequency Scan” to specify the frequency range to scan. Bandwidth: select the bandwidth to scan. UT-160 supports 1/2/3/4/5/6/7/8/1.5/2.5 MHz bandwidth reception. Single channel: Scan the frequency in “Start Freq.”. Scan Repeat: Scan repeatedly.
- Page 5 Easy HD Expressway! WWW.HIDES.COM.TW...
- Page 6 Easy HD Expressway! Check if Diversity Mode is working While clicking on the “Signal Statistics” in the “Control” menu of Bdaviewer+, you may check if the diversity mode is working. The two chips’ signal statistics are shown individually. WWW.HIDES.COM.TW...
- Page 7 Easy HD Expressway! WWW.HIDES.COM.TW...
Need help?
Do you have a question about the UT-160 and is the answer not in the manual?
Questions and answers