Installing Instant Tv - ADS Technologies USBAV-704 USB INSTANT TV User Manual

RCA Video In - Use the supplied A/V cable to connect other video
sources to this video input jack.
S-Video In - If you have video sources with an S-Video output, you can
connect an S-Video cable (not supplied) to Instant TV to capture from
S-Video sources. Generally S-Video provides improved video quality over
RCA (composite) video sources.
TV Tuner - The Instant TV includes a Cable Ready TV tuner. Connect
your cable TV source to Instant TV to tune up to 125 channels of
Cable television.
Installing your Instant TV
Follow these easy steps to install the Instant TV hardware and
software and you'll be watching and recording TV on your Windows
XP PC in minutes.
Im p o r t ant Note Be f or e yo u S ta r t:
The Installation of the Instant TV hardware and device drivers is quick
and simple. Please follow the instructions to install the drivers first,
before connecting the Instant TV hardware to your PC. The Driver
Install step will check for a Microsoft USB Update. This patch has
already been distributed by Microsoft's Windows Update. If your
updates are current, you probably already have this update. If this patch
is not present on your system, we will install the patch during this
installation step. Once the patch is installed you will be required to
re-boot your PC. Once you have installed the drivers and the Microsoft
update, then you can connect the Instant TV device to your USB 2.0
port, Instant TV will be recognized and the drivers will load.
7