Advertisement
Quick Links
Advertisement
Related Manuals for Altice UBC1319AA00
Summary of Contents for Altice UBC1319AA00
- Page 1 UBC1319AA00 DOCSIS 3.0 Wireless eMTA Quick Installation Guide...
-
Page 2: Safety Notices
Place your cable modem within a proper distance from the outlet. RJ-45 • INSTALLING THE UBC1319AA00 1. Connect the included leg stands to the bottom of the device to enable the modem to be installed vertically. Connect the coaxial cable (not supplied) to the RF (cable) connector on... - Page 3 UBC1319AA00 Quick Installation Guide • DEVICE WALL MOUNT INSTRUCTIONS You can mount the UBC1319AA00 on a wall by following the 5. Separate the wall mounting pieces. Mount the top and steps below: bottom leg stand pieces (Figure 1) onto the UBC1319AA00 as shown in Figure 2.
- Page 4 WPS: On the front panel, the WPS button is used for the Wi-Fi Protected Setup (WPS) push button method to connect a client “MyAltice” then a space, and the last 6 Wi-Fi device to the UBC1319AA00. When a user pushes the WPS Wireless Default characters of the WAN MAC address (in SSID (wireless button or triggers WPS via the Web UI, it flashes for 4 minutes...
-
Page 5: Front Panel
UBC1319AA00 Quick Installation Guide • LED BEHAVIOR Normal State Faulty/Alarm State Normal State LED ECO Mode Enabled) (LED ECO Mode is Automatically Disabled) FRONT PANEL DS/US Blinks White = Problem on the network and ON Solid White (downstream/ device cannot link properly... - Page 6 UBC1319AA00 Quick Installation Guide • FEDERAL COMMUNICATION COMMISSION (FCC) INTERFERENCE STATEMENT This device complies with Part 15 of the FCC Rules. Operation is 5GHz Wireless Statement: subject to the following two conditions: (1) This device may not For operation within the 5.15~5.25GHz and 5.47~5.725GHz...