Sunitec CSH 160 Operations Manual & Parts List

Hand-held pneumatic concrete saw

Hide thumbs

page of 16

/ 16
Bookmarks

Quick Links

Download this manual

Operation Manual & Parts List

18" Hand-Held Pneumatic Concrete Saw

14" Hand-Held Pneumatic Concrete Saw

22 Harbor Ave., Norwalk CT 06850 USA

4330 Center St., Deer Park, TX 77536 USA

Phone (800) 700-5919 or (203) 853-9522 • Fax (203) 853-9921

www.csunitec.com • e-mail: info@csunitec.com

Model CSH 160

and

Model CSH 135

CS Unitec, Inc.

Need help?

Do you have a question about the CSH 160 and is the answer not in the manual?

Questions and answers

Summary of Contents for Sunitec CSH 160

Page 1 Operation Manual & Parts List Model CSH 160 18” Hand-Held Pneumatic Concrete Saw Model CSH 135 14” Hand-Held Pneumatic Concrete Saw CS Unitec, Inc. 22 Harbor Ave., Norwalk CT 06850 USA 4330 Center St., Deer Park, TX 77536 USA Phone (800) 700-5919 or (203) 853-9522 • Fax (203) 853-9921...
Page 2 AIR CONCRETE SAW CS Unitec, Inc. 22 Harbor Ave., Norwalk CT 06850 USA 4330 Center St., Deer Park, TX 77536 USA Phone (800) 700-5919 or (203) 853-9522 • Fax (203) 853-9921 www.csunitec.com • e-mail: info@csunitec.com...
Page 3 CS Unitec, Inc. 22 Harbor Ave., Norwalk CT 06850 USA 4330 Center St., Deer Park, TX 77536 USA Phone (800) 700-5919 or (203) 853-9522 • Fax (203) 853-9921 www.csunitec.com • e-mail: info@csunitec.com...
Page 4 THROTTLE HANDLE ASSEMBLY CS Unitec, Inc. 22 Harbor Ave., Norwalk CT 06850 USA 4330 Center St., Deer Park, TX 77536 USA Phone (800) 700-5919 or (203) 853-9522 • Fax (203) 853-9921 www.csunitec.com • e-mail: info@csunitec.com...
Page 5 CS Unitec, Inc. 22 Harbor Ave., Norwalk CT 06850 USA 4330 Center St., Deer Park, TX 77536 USA Phone (800) 700-5919 or (203) 853-9522 • Fax (203) 853-9921 www.csunitec.com • e-mail: info@csunitec.com...
Page 6 AIR MOTOR GEARBOX ASSEMBLY CS Unitec, Inc. 22 Harbor Ave., Norwalk CT 06850 USA 4330 Center St., Deer Park, TX 77536 USA Phone (800) 700-5919 or (203) 853-9522 • Fax (203) 853-9921 www.csunitec.com • e-mail: info@csunitec.com...
Page 7 CS Unitec, Inc. 22 Harbor Ave., Norwalk CT 06850 USA 4330 Center St., Deer Park, TX 77536 USA Phone (800) 700-5919 or (203) 853-9522 • Fax (203) 853-9921 www.csunitec.com • e-mail: info@csunitec.com...
Page 8 PRE-OPERATING INSTRUCTIONS Check air supply for correct pressure (90 PSI min.) and sufficient flow (85 CFM min.). Daily, blow out air line to dislodge any debris, moisture or foreign matter from the air line and the compressor. WARNING! Use extreme caution when blowing out pressurized air lines and or air hoses.
Page 9 WARNINGS!!! • Always turn off the air supply and disconnect the air supply hose before installing, removing, or adjusting any accessory on this tool — especially the cutting blade — or before performing any maintenance on this tool. Failure to do so could result in serious injury or death! •...
Page 10 CS Unitec Hand-Held Pneumatic Concrete Saw Congratulations on your purchase. We consider the CS Unitec Hand-Held Pneumatic Concrete Saw to be among the finest concrete saws in the world. It is engineered to withstand the construction environment and will last many years with the proper care and maintenance.
Page 11 Standards Institute Safety Code for Portable Air Tools (ANSI B186.1) and any other applicable safety codes and regulations. B186.1 information is available from the National Standards Institute, Inc., 11 West 42 Street, New York, NY 10036. CS Unitec, Inc. 22 Harbor Ave., Norwalk CT 06850 USA 4330 Center St., Deer Park, TX 77536 USA Phone (800) 700-5919 or (203) 853-9522 •...
Page 12: Warranty
WARRANTY The manufacturer of this product warrants this product to be free from defects in materials and workmanship for a period of six (6) months from the date of original purchase. THERE ARE NO OTHER WARRANTIES WHICH EXTEND BEYOND THE ABOVE. ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, ARE EXCLUDED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS, OR FITNESS FOR A PARTICULAR PURPOSE.
Page 13 OPERATIONAL AND SAFETY INSTRUCTIONS: BE SURE TO READ ALL INSTRUCTIONS BEFORE ASSEMBLING AND OPERATING THIS EQUIPMENT. • All CS Unitec pneumatic saws are designed to be operated @ 90 PSI min. (6.2 bar) air pressure 100 psi maximum, 85 CFM min., with a minimum 1/2” (13 mm) I.D.
Page 14 ASSEMBLY INSTRUCTIONS Install blade. This saw rotates in a clockwise direction when viewed from the right side of the saw. Be careful that the arrow on the blade goes in the same (clockwise) direction. Place blade on the hub of the inner flange and then secure the outer flange and 5/8”-11 left-hand nut.
Page 15 CS Unitec, Inc. 22 Harbor Ave., Norwalk CT 06850 USA 4330 Center St., Deer Park, TX 77536 USA Phone (800) 700-5919 or (203) 853-9522 • Fax (203) 853-9921 www.csunitec.com • e-mail: info@csunitec.com...
Page 16 Operation Manual & Parts List Model CSH 160 18” Hand-Held Pneumatic Concrete Saw Model CSH 135 14” Hand-Held Pneumatic Concrete Saw CS Unitec, Inc. 22 Harbor Ave., Norwalk CT 06850 USA 4330 Center St., Deer Park, TX 77536 USA Phone (800) 700-5919 or (203) 853-9522 • Fax (203) 853-9921...

This manual is also suitable for:

Csh 135