Advertisement
Slide the selector switch to select a skill level. The selected level will be displayed in
Screen 1 ( L-1 for skill level 1, L-2 for skill level 2, and L-3 for skill level 3).
Skill Level 1— Beginning letter sounds with two-letter word families
Skill Level 2— Beginning letter sounds and three-letter word families
Skill Level 3— Blends combined with two- and three-letter word families
Press either answer button to start the game.
The Word Whiz drill begins after a five-second countdown. Players now have sixty (60)
seconds to build as many words as they can by selecting the correct beginning letter/
blend that builds a real word with the word family in the center screen.
A "correct" sound greets a correct answer while a "negative" sound and display
greets an incorrect answer. The correct word will also display.
Press and hold the POWER button for one second to mute the sound and play in
silence. To restore the sound, press and hold the POWER button again for one second,
or slide the selector switch to choose a new level.
In MUTE mode, the screen will flash to indicate a correct answer.
At the end of 60 seconds, the unit will display a score indicating the number of correct
words built (top screen) out of the total number of words that appeared.
To play again, press any answer button to return to the level select screen.
Note—To disable the 60-second timer, press and hold an answer button. The screen
will flash briefly and the timer will disable to allow for unlimited practice. There is no
scoring in untimed mode. Turn the game off and restart to play again in timed mode.
To save battery power, Word Whiz Electronic Flash Card
automatically if there is no activity after three minutes.
6964 WordWhiz GUD RVMP.indd 2
Battery Information
Installing or Replacing Batteries
WARNING! To avoid battery leakage,
please follow these instructions carefully.
Failure to follow these instructions can
result in battery acid leakage that may
cause burns, personal injury, and property
damage.
Requires: 3 x 1.5V AAA batteries and a
Phillips screwdriver
• Batteries should be installed or replaced by
• Word Whiz Electronic Flash Card
• The battery compartment is located on the
• To install battery, first undo the screw
• Replace compartment door and secure with
Battery Care and Maintenance Tips
• Use (3) three AAA batteries.
• Be sure to insert batteries correctly (with
will power down
™
an adult.
™
requires (3)
three AAA batteries.
back of the unit.
with a Phillips screwdriver and remove the
battery-compartment door. Install batteries as
indicated inside the compartment.
screw.
adult supervision) and always follow the toy
and battery manufacturer's instructions.
• Do not mix alkaline, standard (carbon-zinc),
or rechargeable (nickel-cadmium) batteries.
• Do not mix new and used batteries.
• Insert battery with the correct polarity.
Positive (+) and negative (-) ends must
be inserted in the correct directions as
indicated inside the battery compartment.
• Do not recharge non-rechargeable batteries.
• Only charge rechargeable batteries under
adult supervision.
• Remove rechargeable batteries from the toy
before charging.
• Only use batteries of the same or equivalent
type.
• Do not short-circuit the supply terminals.
• Always remove weak or dead batteries from
the product.
• Remove batteries if product will be stored
for an extended period of time.
• Store at room temperature.
• To clean, wipe the surface of the unit with
a dry cloth.
• Please retain these instructions for future
reference.
3/30/15 4:03 PM
Advertisement
