Advertisement
How to Operate the Unit
Raise the base unit antenna for best reception.
RECHARGE
Charge Contacts. - - - -
J
Attention:
Charge
Contacts
MIC (Microphone)
IN USE/CHARGE Indicator
•When the RECHARGE indicator flashes or the unit beeps intermittently,
recharge the battery.
•Clean the handset and the base unit charge contacts with a soft dry cloth
once a month. Clean more often if the unit is subject to grease, dust or
high humidity. If not, the battery may not charge properly.
To install the belt clip or the headset, see pages 12 and 13 in the Operating
Instructions.
Selecting the Dialing Mode
You can program the dialing mode by using the handset near the base unit.
Your phone comes from the factory set to TONE. If you cannot dial, set to
PULSE. The TALK and SP-PHONE indicator lights must be off before
programming.
(ID
twice (PULSE)
IPROGRAMJ•(AUTO)•
OR
•(PROGRAM]
00
twice (TONE)
•If a power failure occurs, the mode will return to the preset (TONE). Reprogram
if necessary.
-2-
Advertisement
