Moog Grandmother Firmware Update page 9

V1.1.0 RELEASE NOTES
FUNCTIONS WITHIN THE GLOBAL EDIT MODE
This firmware version introduces a couple of useful functions which are launched from within the Global Edit system.
They are selected like other global parameters, but the functions activate immediately upon being selected, since there is
no need to set any additional parameter value for them.
Global Parameters
Group 3
3.1 Load Default Settings
This function resets all the global parameters to their default values. Hold the highest black key (A#2), and while holding it
press the lowest black key (F#0). You will see the three buttons on the LHC blink rapidly for a moment to confirm that the reset
happened. Resetting the global parameters also exits Global Edit mode.
3.2 Show Firmware Version
This function indicates the currently-installed firmware version, using the lights on the LHC buttons. Hold the highest black key
(A#2), and while holding it press the next-to-lowest black key (G#0). Count the number of times the PLAY, HOLD, and TAP buttons
blink on/off to read the version number. PLAY = major version number, HOLD = minor version number, TAP = minuscule/bugfix
version number. Example: this version, v1.1.0: PLAY button blinks one time, then HOLD button blinks one time, then TAP button
blinks zero times (does not light at all).
Group Select Key
A#2
A#2
Parameter Select Key
F#0
F#0