Advertisement
Step 3
Place the front support (05) at the front top of the module
between the left and right panels, so the overhang matches
up with the side strips and the screw holes match up.
Use 4 M4 screws (06) to fix it in place.
Step 4
Carefully lift the top panel
(1) and place it centrally
over the rest of the module.
Align the 3 sets of brackets
in the sides & rear of the
top panel with those in the
module, and fix in place
with 3 butterfly screws (7).
Assembly, Operation & Maintenence Instructions
Page 6
Advertisement
