CyberPower CSB6012 User Manual

6-Outlet Surge Protector 6-Outlet Surge Protector
CSB6012 CSB6012
USER MANUAL
Copyright © 2019 Cyber Power Systems (USA), Inc. All rights reserved.
CONGRATULATIONS ON YOUR PURCHASE
Thank you for selecting the CyberPower CSB6012 Surge
Protector. This manual explains the features and operation
of the CSB6012. Please take a few moments to read
this manual.
FEATURES
1. ON/OFF Reset Control Switch and Circuit Breaker
Controls power to all outlets. The switch is also a 15 A
breaker. When an overload occurs, it will automatically
switch o . To resume operation, ensure the overload
condition is removed and reset the surge protector by
switching the unit ON.
1
2. Standard Grounded Outlets (6)
SPECIFICATIONS
• Model Number: CSB6012
• Outlets: Standard Grounded Outlets (6)
• Surge Protection: 1,200 Joules
• Electrical Rating: 125 V/15 A/1875 W
• UL Clamping Voltage: UL 1449 3rd/400 V (H-N, H-G, N-G)
• Maximum Peak Current: 60,000A
• 3 AC Lines Protected:
H-N: 30,000 A
H-G: 15,000 A
N-G: 15,000 A
The maximum surge possible on household wiring is
6,000 volts)
• Response Time: Less than 1 nanosecond
• Attenuation: Up to 32 dB
2
• Circuit Breaker: Resettable 15 Amp
• EMI/RFI Filtration: 150 kHz to 100 MHz
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only in
dry locations and only indoors. DO NOT plug into another
relocatable power tap. DO NOT "daisy chain" surge
protectors. DO NOT use with any aquarium equipment.
DO NOT use if properly grounded outlets are not
available. DO NOT install this device if there is less than 10
meters (30 feet) or more of wire between the electrical
outlet and electrical service panel. DO NOT use for
medical or life support equipment. This device features an
internal protection that will disconnect the surge
protective component at the end of its useful life, but it
will maintain unprotected power to the load. If this
situation is undesirable for the application, follow the
manufacturer's instructions for replacing the device.
TROUBLESHOOTING
▪ If the ON/OFF is switched OFF, the 15 Amp circuit
TECHNICAL SUPPORT
Please contact our Tech Support Department with
installation, troubleshooting, or general product questions.
• Phone: 1-877-297-6937
• Email: tech@cpsww.com
• Hours of Operation:
1
breaker may have tripped. Examine your connected
equipment and remove the device that is overloading the
circuit. Then, turn the ON/OFF switch back to RESET.
Monday – Friday 7:00am – 6:00pm CST
2