Selecting Coaxial Mode; Playback Controls - KEF LS50 Wireless II User Manual

11.2

Selecting Coaxial Mode

• In the KEF Connect App, tap the Coaxial button (CX) to switch to Coaxial mode.
• Alternatively, press the source button on the top panel of the Primary Speaker;
• Or, press the source button on the remote control.
• The CX icon is lit when Coaxial mode is selected.
You can assign Coaxial mode as a second wake-up source to turn on the
speakers automatically when there is audio input through the coaxial connection.
See chapter "Power Saver – Second Wake-Up Source.
11.3

Playback Controls

All playback controls (except adjusting volume) must be done on the connected device.
The volume can also be adjusted on the top panel or remote control.
41