Setting The Parameters; Button Functions - ICM Controls ICM450 Installation, Operation & Application Manual

2-Pole Contactor
* Thermostat, pressure switch, etc.
1. Press the green SETUP button to enter Setup mode. Setup LED will light.
2. Use the and
3. Scroll through setup by pressing and releasing the SETUP button.
4. When the last parameter has been set, the phase average will be
displayed and the Setup LED will automatically turn OFF.
Press arrows to scroll through
and select user parameter
settings in Setup mode.
HOLD down for fast edit.

ICM450 Wiring Diagrams
L03
Control
Voltage
L01
L02

Setting the Parameters

arrows to change user parameters.

Button Functions

Press to enter
Setup mode
and select user
parameters.
LI3
LI2
LI1
* Thermostat, pressure switch, etc.
L0AD
voltage display
a b, b
(simultaneously).
3-Pole Contactor
Control
Voltage
L01
L02
L03
Hold for
Press to read faults.
Hold for 5 seconds
c, a c
to clear faults and
LI3
LI2
LI1
L0AD
reset memory.