Buffalo Nfiniti WLI-U2-G300N Quick Setup Manual page 6

EN
Using Client Manager To Connect To Your Wireless Network
Fig: 6
To create or edit a profile at any time , click on the Client Manager icon (Black
antenna) in the taskbar.
Using AOSS
AOSS (AirStation One-Touch Secure System) is a simple way to connect
wireless clients to a Buffalo wireless router or access point while enforcing
the most secure encryption possible. You no longer need to worry about
choosing the proper security protocols, IP addresses, or SSID. AOSS
determines the optimal connection and configures itself in seconds. Once
AOSS has been setup, your other devices will need to be connected to the
wireless network by performing AOSS or by manually adding the device to
the wireless network. Please consult the user manual that came with your
AOSS Wireless Router or Access Point to retrieve the necessary connection
information.
Notes: AOSS will scan for an AOSS partner for about two minutes. If it times
out before finding one, just press the AOSS buttons again. Output power is
reduced to 25% of normal during AOSS for security reasons.
If you're having trouble making an AOSS connection you can try the
following:
AOSS will automatically use the highest level of security available for all
currently connected wireless devices.
• Temporarily move the devices closer together
• Temporarily disable all personal firewalls on your PC. These
programs may be re-enabled after AOSS has finished
Fig:7

3
4
.