Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Demco SM14
Summary of Contents for Demco SM14
- Page 1 05-10 AS20005, Rev.4 Page 1...
-
Page 2: Table Of Contents
Thank you for purchasing a Demco sprayer. We feel you have made a wise choice and hope you are completely satisfi ed with your new sprayer. If you have any questions regarding the applications of certain solutions or chemicals, contact your chemical supplier and follow chemical manufacturer recommendations as well as all licensing and use restrictions or regulations. -
Page 3: Warranty Registration
What other products would you like to see DEMCO offer? Comments Owner’s Name: Mailing Address: City: State: Zip Code: Model#: Serial #: Purchase Date: Owner’s Signature: Please return to DEMCO By FAX or tri-folding this form to the backside, it is pre-addressed. Page 3... - Page 4 Postage Demco 4010 320th Street, Box 189 Boyden, Iowa 51234 Page 4...
-
Page 5: Safety, Signal Words
If you have questions not answered in this manual , require additional copies, or if your manual is damaged, please contact your dealer or Demco, 4010 320th Street, P.O. Box 189, Boyden, IA 51234 ph: (712) 725-2311 or Toll Free: 1-800-543-3626 Fax: (712) 725-2380 http://www.demco-products.com... -
Page 6: Equipment Safety Guidelines
SAFETY...YOU CAN LIVE WITH IT EQUIPMENT SAFETY GUIDELINES Every year many accidents occur which could have been avoided by a few seconds of thought and a more careful approach to handling equipment. You, the operator, can avoid many accidents by observing the following precautions in this section. -
Page 7: Safety Sign Locations
SAFETY AWARENESS. A. AB21014 - Warning: Refer to chemical supplier and manufacturer Qty. 1 B. AA21012 - Small Demco Qty. 2 Page 7... -
Page 8: Transport Operations
TRANSPORT OPERATIONS • Adopt safe driving practices: - Always drive at a safe speed relative to local conditions and ensure that your speed is low enough for an emergency stop. Keep speed to a minimum. - Reduce speed prior to turns to avoid risk of overturning. - Always keep ATV in gear to provide engine braking when going downhill. -
Page 9: During Operation
DURING OPERATION • Beware of bystanders, PARTICULARLY CHILDREN! Always look around to make sure that it is safe to start engine of towing vehicle or move sprayer. This is particularly important with higher noise levels and quiet cabs, as you may not hear people shouting. •... -
Page 10: Performing Maintenance
PERFORMING MAINTENANCE • Good maintenance is your responsibility. Poor maintenance is an invitation to trouble. • Make sure there is plenty of ventilation. Never operate engine of towing vehicle in a closed building. Exhaust fumes may cause asphyxiation. • Before working on this machine, stop towing vehicle, set brakes, disengage PTO and all power drives, shut off engine and remove ignition key. -
Page 11: Bolt Torque
BOLT TORQUE TORQUE DATA FOR STANDARD NUTS, BOLTS, AND CAPSCREWS. Tighten all bolts to torques specifi ed in chart unless otherwise noted. Check tightness of bolts periodically, using bolt chart as guide. Replace hardware with same grade bolt. NOTE: Unless otherwise specifi ed, high-strength Grade 5 hex bolts are used throughout assembly of equipment. -
Page 12: Gallon Sprayer (Sm14) Breakdown And Parts List
14 GALLON SPRAYER (SM14) PARTS BREAKDOWN Positive Wire Positive Wire Positive Wire Negative Wire Negative Wire Included with switch Page 12... - Page 13 14 GALLON SPRAYER (SM14) PARTS LIST REF. PART QTY. DESCRIPTION 09244 Replacement Fuse Holder 09272 Replacement 20 Amp Fuse B6PH 3/8” Hose Clamp (Nylon) 380RB 3/8” I.D. Rubber Hose (15’) 04742 Short Rubber Tarp Strap 04658 S-Hook for Tarp Strap...
-
Page 14: Hymb85 Mounting Brackets Breakdown And Parts List
HYMB MOUNTING BRACKETS HONDA, KAWASAKI, POLARIS, YAMAHA with LUGGAGE RACK NOTE: Item No.2 may not be required on all units. HYMB MOUNTING BRACKETS PARTS LIST REF. PART REQ’D QTY. DESCRIPTION 02441-95 Mounting Clamp 02440-95 Mounting Bar 02990 5/16”-18 UNC x 1” Hex Hd. Bolt 00372 5/16”-18 UNC x 1-1/2”... -
Page 15: 80" Boom Assembly (80B10) Breakdown And Parts List
14 GALLON SPRAYER (SM14) WITH OPTIONAL 80” BOOM ASSEMBLY (80B10) PARTS BREAKDOWN NOTE: Use thread sealant on OPTIONAL all threaded fi ttings. 80” BOOM ASSEMBLY (80B10) PARTS LIST REF. PART REQ’D QTY. DESCRIPTION 380RB 3/8” I.D. Rubber Hose (5’) REF. -
Page 16: 12' Boom Assembly (144-B14) Breakdown And Parts List
12’ BOOM ASSEMBLY (144B14) PARTS BREAKDOWN 30 33 NOTE: Use thread sealant on all threaded fi ttings. 12’ BOOM (144B14) PARTS LIST REF. PART REQ’D QTY. DESCRIPTION 02678-95 Boom Mounting Plate 00909 5/16”-18 UNC x 1-1/2” Square U-bolt 00004 5/16” Flatwasher 02802 5/16”-18 UNC Nylon Insert Locknut 04822... -
Page 17: Electric Pump Breakdown And Parts List
ELECTRIC PUMP PARTS BREAKDOWN 8000 543 150 PART NO. 8000 543 150 12 VDC continuous duty motor and positive displacement diaphragm pump. Pump is equipped with viton valves, santoprene diaphragm, and will bypass liquid at 45 PSI. 1.5 GPM maximum discharge. 3/8” FPT ports. ELECTRIC PUMP PARTS LIST REF. -
Page 18: Sprayer Calibration
CALIBRATION INSTRUCTIONS Spray Tip Chart for 90” Booms Spray Tip Chart for 80” and 144” Booms GALLONS PER ACRE GALLONS PER ACRE Liquid Capacity Liquid Capacity 40” TIP SPACING 30” TIP SPACING Pressure 1 Nozzle Pressure 1 Nozzle Tip No. PSI GPM MPH MPH MPH MPH MPH MPH MPH Tip No. -
Page 19: Sprayer Checklist
Water rinse and dry tips before storing. Be sure all bolts are tightened. REPLACEMENT PARTS NOTE: Demco does not and will not make any recom- Replace all worn or damaged parts. mendations concerning the application of various chemicals or solutions. These recommendations relate to either amount or procedure of materials applied. - Page 20 4010 320th St., P.O. BOX 189, BOYDEN, IA. 51234 PH: (712) 725-2311 FAX: (712) 725-2380 or 1-800-845-6420 TOLL FREE: 1-800-54DEMCO (1-800-543-3626) www.demco-products.com Page 20...
Need help?
Do you have a question about the SM14 and is the answer not in the manual?
Questions and answers