Connection Guide - Natec COMPACT User Manual

NPB-1416
USB 1
output
PACKAGE CONTENT
•Powerbank
•USB cable
•Quick installation guide

CONNECTION GUIDE

Charge the powerbank using one of the two input ports: the MicroUSB (3) or USB-C (2) port. Plug the other
end of the cable into a power supply with a USB connector and a 5V output. For faster charging, it is best to
use a charger with a higher output current (2A or more). When using a charger with a lower output current,
charging time is longer. Indicator LEDs gradually light up as it charges. When fully charged all 4 LEDs are lit up.
To charge a device there are two output ports: USB 1 (1) and USB 2 (4). After connecting a mobile device, the
powerbank activates automatically and starts charging the device.
LED BATTERY SATUS INDICATORS
Note: Pressing the power button when not charging, shows the current powerbank charge status. Display
automatically turns off after 30 seconds.
USB-C
USB 2
input
output
Charge
LED 1 LED 2 LED 3 LED 4
status
> 25%
25% - 50%
50% - 75%
75% - 100%
Fully charged
EN PL CZ SK
MicroUSB
input