Specifications - Makita DUH551 Instruction Manual

ENGLISH (Original instructions)
1. Red indicator
2. Button
3. Battery cartridge
4. Star marking
5. Battery indicator
6. Knob
7. Housing
8. Switch trigger B
9. Switch trigger A
10. Lock-off button
11. Adjusting dial
12. Cutting height

SPECIFICATIONS

Blade length
Strokes per minute (min
Overall length
Rated voltage
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest
combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
• Only use the battery cartridges and chargers listed above. Use of any other battery cartridges and chargers may
cause injury and/or fire.
Symbol
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
....... Read instruction manual.
................... Do not expose to moisture.
Intended use
The tool is intended for trimming hedges.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Explanation of general view
13. 10 cm
14. Trimming direction
15. Hedge surface to be trimmed
16. Tilt the blades
17. Press
18. Chip receiver
19. Nut
20. Shear blade
21. Branch catcher
22. Hooks
23. Fit the hooks into groove
24. Grooves
Model
-1
)
DC18RC/DC18RD/DC18RE/DC18SD/DC18SE/DC18SF
DUH551
550 mm
1,065 mm
4.6 - 5.3 kg
BL1815N/BL1820/BL1820B/BL1830/BL1830B/BL1840/
BL1840B/BL1850/BL1850B/BL1860B
Save all warnings and
END013-5
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
ENE014-1
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
GEA006-2
3. Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.
25. Press the levers on both sides
26. Unlock the hooks
27. Blade cover
28. Screws
29. Under cover
30. Plate
31. Crank
32. Oval hole of shear blade
33. Limit mark
34. Holder cap cover
35. Slotted screwdriver
36. Brush holder cap
DUH651
650 mm
1,000 - 1,800
1,135 mm
D.C.36V
4.7 - 5.5 kg
7