Write-Protecting A P2 Card; Installing A Thunderbolt Driver For Windows; Installing A Thunderbolt Driver For Mac - Panasonic AU-XPD3P Operating Instructions Manual

Write-protecting a P2 Card

A P2 card has a write-protect switch. Setting
this switch to "PROTECT" can prevent writing
and deleting of data.
Note: The write-protect switch is not effective
when the P2 card is inserted in the P2 drive.
Make sure you remove the P2 card from the
P2 drive, set the switch, then re-insert the card,
in order to effect the switch setting.
To prevent the writing and deleting of data
when using a Memory Card Adapter (AJ-
P2AD1), set the memory card write-protect
switch on the adapter.

Installing a Thunderbolt Driver for Windows

Refer to "When Using Windows" in the installation manual on the website for
information on how to install the Thunderbolt driver for Windows.

Installing a Thunderbolt Driver for Mac

Refer to "When Using Mac" in the installation manual on the website for information
on how to install the Thunderbolt driver for Mac.
For the latest information on drivers, visit the "Service and Support" page on the
following website.
http://pro-av.panasonic.net/
E-15
P2 card
PROTECT
Write-protect
switch