Removing The P2 Drive From A Personal Computer - Panasonic AU-XPD3P Operating Instructions Manual

n Daisy chain connection
• The P2 drive can be connected to a single personal computer in a daisy
chain of up to 6 devices.
• To connect the P2 drive in a daisy chain with another Thunderbolt
3-compatible device, use the Thunderbolt 3 cable supplied with the other
device.
• After connecting the P2 drive to a personal computer, you can connect
another device in a daisy chain by following these steps:
1
Connect the Thunderbolt 3 cable to the
free Thunderbolt 3 port on the P2 drive.
2
Connect the other end of the cable to the
Thunderbolt 3 port on the device to be
daisy-chained.
Removing the P2 Drive from a Personal
Computer
n Windows
If a P2 card is inserted in the P2 drive, click the up arrow icon in the desktop
task tray, select "Safely Remove Hardware and Eject Media", select "Remove P2
drive" before disconnecting the Thunderbolt 3 Cable.
When there is no P2 card in the drive, the Thunderbolt 3 Cable can be removed
without the need for any computer operations.
n macOS
If a P2 card is inserted in the P2 drive, drag the P2 card icon to the Trash, check
that the icon has disappeared and the access indicator on the P2 drive has
turned off before disconnecting the Thunderbolt 3 Cable.
When there is no P2 card in the P2 drive, the Thunderbolt 3 Cable can be
removed without the need for any computer operations.
u NOTE:
• After safely removing hardware in Windows, you can make the computer
recognize the P2 drive again by connecting the Thunderbolt 3 Cable.
E-12