Advertisement
Available languages
Available languages
DISPLAYS AND BUTTONS
CHRONOGRAPH
BUTTON B
NORMAL-POSITION
CROWN
2st CLICK POS.
1st CLICK POS.
BUTTON A
USING THE CHRONOGRAPH
This chronograph is able to measure and display time in 1/20
second united up to maxinum of 59 minutes 59 seconds.
The chronograph 1/20 second hand keeps continuously for 30
seconds after starting, and then stops at Zero position.
Measuring time with the stopwatch
1. Press button „A" to start the chronograph.
2. The chronograph can be started and stopped each time
button „A" is pressed.
3. Press button „B" to reset the chronograph and chronograph
minute and second hands return to their zero positions.
„A"
Time measurement
TIME SECOND HAND
CHRONO MINUTE HAND
CHRONO 1/20 SECOND
DATE
CHRONO SECOND HAND
„A"
Stop
„B"
RESET
SETTING THE TIME
1. Pull the crown counter-clockwise out to the 2nd Click Position.
2. Turn the crown clockwise to set hour and minute hands.
3. After the time has been set, push the crown back to
the Normal position.
SETTING THE DATE
1. Pull the crown counter-clockwise out to the 1nd Click Position.
2. Turn the crown counter-clockwise to set the date.
* If the date is set between the hours of around 9:00 PM and
1:00 AM, the date may not change on the following day.
3. After the date has been set, push the crown back to
the Normal position.
CHRONOGRAPH RESET (AFTER REPLACING BATTERY)
This procedure shoud be performed when the chronograph
second hand does not return to the Zero position.
1. Pull the crown counter-clockwise out to the 2nd position.
2. Press button „A" to set the chronograph second hand to
the zero position.
The chronograph hand can be advanced rapidly by
continuously pressing button „A".
3. Once the hand have been zeroed, return the crown to
the normal position.
* Do not push crown to normal position while the
chronograph second hand returns to zero position.
Advertisement
