Assembly - Ariens Apex 48 Operator's Manual

ASSEMBLY

WARNING: AVOID INJURY.
Read and understand the
Safety section before
proceeding.
1. Remove wrap and packaging materials
from unit.
2. Remove unit from shipping container.
See Move Unit Manually on page 16.
3. Remove hardware from negative (-)
battery cable, but DO NOT discard.
4. Secure negative (-) battery cable to
negative (-) battery terminal with
hardware removed in step 3.
5. Return seat to operating position. See
Figure 3.
6. Remove two bolts, two nuts, one washer
and one spacer from each side of
discharge chute bracket. See Figure 4.
Figure 3
EN - 9
Figure 4