bonavi Buggy Board Assembly Instruction page 2

Buggy Board
EN
EN1888 - IMPORTANT: Keep these instructions for future reference.
Assembly Instruction - Buggy Board & Seat
1.
Insert the wheels in the
designated slots and press until a
clicking sound is heard.
4.
Attach the platform to the pram by
placing the strap around the chassis and
pulling them through the opening slit.
7.
Insert the seat in the designated slot.
2.
To adjust the swing arms height, locate
the turn dial under the platform and rotate
the knob into the given direction.
5.
To adjust the distance between the
platform and the chassis press the silver
button and adjust the distance.
Storage
In the case your platform is not in use and you wish to leave
the platform attached to your pram locate the designed strap.
1.
Attach the carabiner to the illustrated hook.
WARNING: Keep the strap out of
the reach for children to avoid injury or
danger of strangulation.
3.
Return the platform to its upward
position. To adjust the width of the swing
arms push the upper and lower push
button simultaneously.
6.
Press the locking device, located at the
bottom of the platform, and pull up the
protective plug.
2.
Raise the strap to the handle bar
and secure with the locking device.