Page 1
AKASO WIFI Camera Quick User Guide I. Download & install Yoosee APP for phone Go to Apple APP Store or Android Google Play and search for Yoosee or you can go to www.yoosee.co to download & install Yoosee then finish registration according to the instructions and log in.
Page 2
Device needs to be back to initialized status by pressing the “reset” button for 5 seconds when adding new devices. Two ways for adding device: one is via Wi-Fi, the other is via wire. Wi-Fi adding can be divided into smart link and AP connection. Smart link Select smart link→follow the instructions→input default password (see pic 3.3.2) after camera connecting with Wi-Fi →save.
Page 4
AP connection: Select AP connection→input the Wi-Fi password asked by device and create visiting password→click “next step”→enter into interface of “select Wi-Fi for device” and click on “go to set Wi-Fi” →jump to phone’s Wi-Fi listing interface, select your wanted device GW-AP-XXX and click on the reminder of “click here now to return to APP”(see pic 3.4.3) →...
Page 5
Wired adding Select wired connection→select wanted device in new device listings→create device name(please input default password manually if device got one) →save Notes: If reminder shows up (see pic 3.5.1) when adding new devices, please ask device owner to unbind & delete device in “settings”.
Page 6
III. Sharing to friends 1. Click on “sharing” button and enter into sharing interface (see pic.4.1.2) then share camera to friends, please see below picture.
Page 7
2. Please ask your friends to install, register and login the latest Yoosee version. 3. How does your friends add sharing camera? 1) If friends nearby. Ask your friends to open APP→click on “scan” →scan the QR code→jump to the interface of adding sharing device(see pic 4.2.3) →done.
Page 9
2) If friends not nearby. You can share the link to friends by social networking tools (only WeChat is supported), details are as follows: Click on the link on WeChat→click the button on right upper corner (see pic 4.3.2) → open it via browser→enter into the interface of being invited→jump to the interface of adding sharing device(see pic 4.3.3) →done...
Page 10
Or you can copy the sharing link and send it to your friends→copy the link manually→ open APP→click on “add to share device”→enter into the interface of adding sharing device, details are as follows:...
Page 12
4. Sharing Management The interface of “sharing management “will appear when clicking “sharing “button if this device has been shared to other people, you can delete the shared friends or share it again to other friends.
Page 13
IV. Introduction of function buttons ① ⑤ ③ ② ④ ⑥ ① Scan ② Weak password icon: Suggest to revise password when this icon is on. ③ Defense succeeded & disarming succeeded : Deploy must be switch on when using alarm notification and alarm recording.
Page 14
⑦ ⑥ ⑤ ④ ③ ① ② ①Remote recording: Record videos and save it to phone. ②Intercom system: Press the button and you can talk remotely. ③Remote capturing: Capture video screenshot and save it to phone. ④Volume ⑤Video Definition ⑥Direction indicator pointer: You can control the rotation by sliding left and right. ⑦Monitoring area: slide it up and down (left&right) to control the rotation in You can...
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. V. Settings Device information: Firmware version. We need to know firmware information when something happens to firmware. Time settings: Set device’s time and time zone. Picture and sound:...
Record settings: Set record mode---record manually, record alarm, record timer. Note: motion detection or sensor should be switched on as well as defense succeeded when using alarm notification and alarm recording. Add sensor (this function needs device support) : It’s available to add ordinary sensor (door magnetic, PIR), remoter, special sensor (smoke detector, special gas detector).
Page 18
VI. FAQ ① Q: Notice wrong password when checking real time videos. A: Device visiting password probably has been changed by other people but you can enter correct remote visiting password in the popup. If you forgot the password, you can press the “reset”...
Camera is not supported for 5G Wi-Fi, please connect with 2.4G Wi-Fi. Some items restricted on Wi-Fi access such as AP isolation, Wi-Fi Zone and etc. should be closed. ⑦ Q: AP devices can’t be found on Phone Wi-Fi list. A: Firmware is not supported for this function.
Need help?
Do you have a question about the IP13M903 and is the answer not in the manual?
Questions and answers