Environmental Protection; Noise/Vibration Information; Declaration Of Conformity - wurth master ANG 12 Operating Instructions Manual

Environmental Protection

Recycle raw materials instead of
disposing as waste.
The machine, accessories and
packaging should be sorted for
environmental-friendly recycling.
Defective or worn out batterie packs must be recy-
cled according to the guidelines 91/157/EEC.
Do not throw the battery pack into the household
waste, into fire or water.
Do not open the machine or batterie packs! Dispose
of the batterie packs and machine by means of the
collection facilities provided.
Guarantee
For this Würth machine, we provide a 6-month
guarantee against material and workmanship de-
fects from the date of purchase (verified by invoice
or delivery document). Damage that has occurred
will be corrected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the guarantee.
Claims can only be accepted if the device is sent un-
disassembled to a Würth branch office, your Würth
sales representative or a customer service agent for
Würth power tools.

Noise/Vibration Information

Measured values determined according to
EN 50 144.
Typically the A-weighted sound pressure level of the
tool is 78,5 dB (A). The noise level when working
can exceed 85 dB (A).
Wear ear protection!
The typical hand-arm vibration is below 2,5 m/s

Declaration of Conformity

We declare under our sole responsibility that this
product is in conformity with the following standards
or standardization
EN 55 082-2, EN 61000-4-2, ENV 50 140 ac-
cording to the provisions of the regulations
89/336/EEC.
01
Adolf Würth GmbH & Co. KG
Rolf Bauer
documents: EN 50 081-1,
ppa. Otto Steck
2
.
11