Normal And Toggle Modes; Sensitivity - Keith McMillen Instruments QuNeo Reference Manual

3d multi-touch pad controller
Hide thumbs Also See for QuNeo:
Table of Contents

Advertisement

Normal and Toggle Modes

All sensors now utilize a drop down menu that selects Normal or Toggle mode for the note
and pressure sources.
To the right of the menu are "Vel/CC Output" number
boxes where you can specify the velocity and CC
value output for the note and pressure CC#.
Here are some examples for how these can be used:
To get notes with velocity and CCs with continuous pressure behavior, set the drop
down menu to "Normal" and set the "Vel/CC output" boxes to "var" (variable) and
"con" (continuous). "Var" and "con" appear in the number box in place of 0.
Normal mode can also be used to get notes and pressure to output like momentary
switches. The "Vel/CC output" boxes can be set to a value which will output when
you press down and go back to 0 when you let go.
In Toggle mode the "Vel/CC output" boxes set a value for the note or CC# to toggle
on to (always toggles off to 0).
Set the "Vel/CC output" boxes to "var" (variable) or "con" (continuous) while in
Toggle mode to make the "on" toggle output variable velocity (for notes) or the initial
pressure value (for pressure CC#s). "Var" and "con" appear in the number box in
place of 0.

Sensitivity

To edit the sensitivity of the various sensors, use the sensitivity dial at the bottom of each
of the edit panes. Sensitivity controls how easy it is to get higher value ranges when
controlling pressure and velocity. The higher the sensitivity, the easier it will be to reach the
upper range of values. The lower the sensitivity, the more difficult or impossible it will be to
get higher value ranges.
The sensitivity dial in the Pad Edit Pane is called Global Sensitivity. This differentiates it
from the Pad [#] Sensitivity Adjust parameter, visible from the Advanced tab.
The Sensitivity dials are global for all controls of that sensor type.
Example: Adjusting the sensitivity in one of the Pad Edit Panes will adjust the sensitivity
for all pads. The Sensitivity dials for the Horizontal Sliders are linked, the Vertical Sliders,
the Left/Right Buttons, etc.
55

Advertisement

Table of Contents
loading

Table of Contents