3Com OfficeConnect WX1200 Release Note page 26

26 W LAN S
IRELESS WITCH AND
Deleting a user group or MAC user group does
not delete membership from its members.
(14833)
If you type the clear usergroup or clear mac-user-
group command to delete a user group or MAC user
group, the display aaa command shows that the
user group is gone. However, the user profiles for the
users still list them as members of the deleted groups.
Use the clear user group and clear mac-user group
commands in addition to the clear usergroup and
clear mac-usergroup commands to explicitly remove
individual users or MAC users from a group.
Incorrect zero value for Acct-Authentic appears
in accounting statistics. (14851)
In the output of the display accounting statistics
command, the Acct-Authentic field in accounting
records always displays 0 (zero) to indicate the loca-
tion where a user was authenticated for the session.
The correct value is 1 (one) if RADIUS performed
authentication or 2 if authentication took place in the
local WX database.
Ignore the Acct-Authentic value in display account-
ing statistics output.
The display radius command is not documented
and has no output. (18233)
C MSS V 3.0 R
ONTROLLER ERSION
N
ELEASE OTES
Web AAA Issues
Web AAA users receive page not found error if
RADIUS is the authentication method. (17752)
If you use a RADIUS server group as the authentica-
tion method for Web AAA users, the user receives a
page not found error in their browser after entering
their username and password. This issue does not
affect local authentication.
The message can safely be ignored. Web AAA is com-
pleted and the user is placed on the proper VLAN in
spite of the error message displayed on the browser.
Open a new browser window about 20 seconds after
entering the username and password. Alternatively,
use local authentication.
Web AAA is not supported for wired
authentication clients. (17934)
Clients receive page not found error if RADIUS is
used for Web AAA authentication. (17752)
Normally, when a client logs in using a Web AAA
page, the WX switch should display a message
informing the client that they will be redirected
shortly. This works as expected when the local data-
base is used to authenticate the Web AAA client.
However, if RADIUS is used, the client instead receives
a page not found error in the browser.
Wait for 20 seconds for the login to complete, then
close and reopen the browser.