Page 1
TRACK Air+ User Manual App Download Button and Interface Instruction First Use and Pairing Connect Power On and Off Basic Operation Smart Noise Cancelling Wear Detect Sleep Connect To a New Device ...
Page 2
First Use and Pairing Put the two earbuds into the charging case to power them on. They will enter pairing mode automatically Connect 1. Connect the left earbud...
Page 3
Connect the left earbud with your phone via Bluetooth, when the earbuds are in pairing mode * When the two earbuds are in the charging case, long press the function button for 2s to enter pairing mode. The light will fast blink continuously 2.
Page 4
Right after the left earbud is connected, a pop up window will appear on your phone. Click 'Pair' or 'Ok', and the right earbud is paired with the phone to complete the connection 3. Connected...
Page 5
Done! Put on the earbuds and enjoy your music. * Each time it's used, the earbud which is taken out of the charging case first will automatically become the master one. And the master earbud will connect to the moible phone and synchronously transfer the signal to the other one Power On and Off...
Page 6
When the earbuds are in the charging case, just take them out and then will power on automatically, so you can use them right away...
Page 7
To power the earbuds off, put them back into the charging case and close the cover Basic Operation Gesture Control...
Page 8
To play/pause music or answer/end phones calls, double tap the earbuds. The function can be customized in the Libratone app Function Button...
Page 9
CityMix® Smart noise cancelling automatically adjusts to an appropriate CityMix® level according to your surroundings and motions CityMix® Smart is disabled by default. You can change the settings in the Libratone app * You can also adjust the noise cancelling level manually in the App...
Page 10
If you take both earbuds off, music will be paused or phone calls will be transferred back to your phone automatically The earbuds will resume playing or answer phone calls automatically when you put any one of them back on...
Page 11
Sleep If there is no music playing, or no other interaction with the earbud for a while, it will enter sleep mode automatically for power saving. The earbud will be disconnected when in sleep mode...
Page 12
Pick up the earbud to wake it up from sleep mode. It will automatically reconnect with the last used device Connect To a New Device...
Page 13
Make sure the two earbuds are in the charging case. Long press the function button for 2s to enter pairing mode. The light will fast blink continuously. Follow the steps above to complete the connection Watch the video guide (IOS) Watch the video guide (Android) Status Indication...
Page 14
① Indicator Light (LED) Normal Status Indication...
Page 15
The LED keeps blinking when Bluetooth pairing mode is activated...
Page 16
The LED will blink once to confirm or respond to the following actions: . Opening the charging case . Short pressing the Function Button . Putting in/taking out any earbud . Plugging in the charging cable...
Page 17
The white and red LEDs will both breathe during the software update process (At the above situations, if the color of the LED is not specified, the red LED will blink when the charging case is low battery, or else the white LED will blink) Charging Indication...
Page 18
White LED is solid on when charging(The LED is red when low battery) The LED is off when fully charged We suggest to keep both the left and the right earbud in the Bluetooth device list on your phone Each time it's used, the earbud which is taken out first will become the master one automatically. It will connect to your phone directly and transfer the audio signal to the other one.
Page 19
Secondly, if both earbuds are in the Bluetooth device list, they can be the master one in turn to balance the power consumption of them, which will extend the overall working time. Playback is interrupted? Normally, the working distance is 10m at a non-sheltered area. If the distance to the playing device is more than 10m the music playback will be interrupted.
Need help?
Do you have a question about the TRACK Air+ and is the answer not in the manual?
Questions and answers