3Com OfficeConnect 3C1670500A Installation Manual

DIA1670-5AAA04.qxd 23/5/05 12:15 pm Page 1
Installation Guide
OfficeConnect
®
Gigabit Switch 5
(3C1670500A)
Gigabit Switch 8
(3C1670800A)
Gigabit Switch 16
(3C1671600)
3Com Corporation, Corporate Headquarters, 350 Campus Drive, Marlborough, MA 01752-3064
Copyright © 2005 3Com Corporation. All rights reserved. 3Com, the 3Com logo, and
OfficeConnect are registered trademarks of 3Com Corporation.
Microsoft, MS-DOS and Windows are registered trademarks of Micorsoft Corporation.
All other company and product names may be trademarks of their respective companies.
Part No: DIA1670-5AAA04 Published: May 2005
INTRODUCTION
About This Guide:
Thank you for purchasing the OfficeConnect Gigabit Switch. This high
quality, Gigabit Ethernet Switch is an easy, efficient way of creating a
network or expanding an existing network. The Switch's Gigabit ports
provide support for bandwidth intensive applications, and allow high-
speed connections to servers, and to the rest of the network. An example
configuration is shown in Figure 1.
The Switch is compact and attractively designed for desktop use. It can be
stacked with other units in the OfficeConnect family, which include
Cable/DSL gateways, wireless devices, Fast Ethernet and Gigabit Ethernet
switches. The OfficeConnect family is a fully integrated system, enabling
you to share computer resources, and take advantage of new technologies
as your network grows.
Your Package Contains:
• OfficeConnect Switch
• Power adapter for use with the Switch
• Stacking clip
• Four rubber feet
• This Installation Guide
• Support and Safety Information sheet
• Warranty flyer
About This Guide
This guide will use the term Switch when referring to the OfficeConnect
Gigabit Switch.
ABOUT YOUR SWITCH
OfficeConnect Gigabit Switch - Front
1 2
Port Status
1 2 3 4 5 6 7 8 1 2
Blue = 1000M Green = 100M Yellow = 10M Flash = Activity
1 Power LED 4 Power Adapter Socket
Green Only use the power adapter that is supplied with the
Switch.
Indicates that the Switch is powered on. If the LED is
off, but the Power Adapter OK LED is lit, there may be
5 Power Adapter OK LED
a problem with the Switch's internal power supply.
Green
Refer to Problem Solving.
Indicates that the power adapter is supplying power to
2 Five/Eight/Sixteen Port Status LEDs the Switch. If the LED is off, there may be a problem
Blue (1000 Mbps link) / Green (100 Mbps link) / with the power adapter or adapter cable (refer to
Yellow (10Mbps link) Problem Solving).
If the LED is on, the link between the port and the next
6 10BASE-T/100BASE-TX/1000BASE-T Ports
piece of equipment is OK. If the LED is flashing, the
Use suitable TP cable with RJ-45 connectors. You can
link is OK and data is being transmitted or received. If
connect your Switch to a workstation, or any other
the LED is off, nothing is connected or the connected
piece of equipment that has 10BASE-T/100BASE-TX/
device is turned off, or there is a problem with the
1000BASE-T connectivity.
connection (refer to the Problem Solving section).
Each port is capable of autosensing for 10 Mbps,
3 Duplex LEDs 100 Mbps or 1000 Mbps operation.
Yellow (10/100/1000 Mbps, full duplex) /
All ports have an automatic MDI/MDIX feature, which
Off (10/100 Mbps, half duplex)
means either straight-through or crossover cable can
be used to connect to any port.
DIMENSIONS AND STANDARDS
Dimensions and Operating Conditions
Standards
Functional: ISO 8802/3, IEEE 802.3, 802.3u
Safety: UL 60950-1, EN 60950-1, CSA 22.2 #60950-1, IEC60950-1
EMC † : EN 55022 Class B, EN 55024, FCC Part 15 Class B*
ICES-003 Class B
Environmental: EN 60068 (IEC 68)
* Refer to Regulatory Notices in the Support and Safety Information sheet.
†
Category 5 (or better) screened cables must be used to ensure compliance with the Class B
requirements of the above standards. The use of unscreened cables complies with the Class A
requirements.
Gigabit Switch 5 0 to 40ºC
6VA, 20.8 BTU/hr (32 to 105ºF)
power requirement operating
temperature
Gigabit Switch 8
8VA, 27.7 BTU/hr
power requirement
Gigabit Switch 16
22.5VA, 77.9 BTU/hr
power requirement
Depth:
135.4 mm (5.33 in.)
Width:
225 mm (8.08 in.)
Weight:
Gigabit Switch 5: 1.0 Kg (2.2 lb)
Gigabit Switch 8: 1.0 Kg (2.2 lb)
Height:
35.35 mm
(1.36 in.)
Width:
228 mm (9.12 in.)
Height:
54.6 mm (2.1 in.)
Weight:
Gigabit Switch 16: 1.5 Kg (3.3lbs)
OfficeConnect Gigabit Switch - Rear
3
3C1670800A
Duplex
10-30VDC
On = Full
1A MAX
3 4 5 6 7 8
OfficeConnect Gigabit Switch 8
WARNING: RJ-45 ports.
These are shielded RJ-45 data sockets. They cannot be
used as standard traditional telephone sockets, or to
connect the unit to a traditional PBX or public telephone
network. Only connect RJ-45 data connectors, network
telephony systems, or network telephones to these
sockets.
Either shielded or unshielded data cables with shielded or
unshielded jacks can be connected to these data sockets.
VORSICHT: RJ-45-Portes.
Diese Portes sind geschützte Datensteckdosen. Sie dürfen
weder wie normale traditionelle Telefonsteckdosen noch
für die Verbindung der Einheit mit einem traditionellenm
privatenm oder öffentlichenm Telefonnetzwerk gebraucht
werden. Nur RJ-45- Datenansclußhlüsse,
Telefonnetzsysteme oder Netztelefone an diese
Steckdosen anschließen.
Entweder geschützte oder ungeschützte Buchsen dürfen
an diese Datensteckdosen angeschlossen werden.
CONFIGURATION
Workstation requiring
High Bandwidth Connection
1000 Mbps Connections
0 to 95%
(non-condensing)
humidity
Depth:
185.4 mm (7.3 in.)
10/100 Mbps Connections
Figure 1 Network showing sample configuration with Gigabit Switch.
4 5 6
OK 8
AVERTISSEMENT : Prises RJ-45 blindées.
Ces prises ne peuvent servir comme prises téléphone
standard et ne permettent pas la connexion de l'appareil
à un système PBX ni à un réseau téléphonique public. N'y
branchez que des prises RJ-45 mâles adaptées, ou des
systèmes de réseaux téléphoniques. Il est possible d'y
brancher des câbles blindés ou non comportant des prises
de type Jack (blindées ou non).
Server
OfficeConnect
Gigabit Switch
OfficeConnect Switch 8
with Gigabit Uplink
1