Page 1
LAN CABLE HiTESTER 3665 Optical/Telecom Measurement Network Construction with Network Construction with Network Construction with Network Construction with Network Construction with Network Construction with Network Construction with Network Construction with Network Construction with Network Construction with Network Construction with Network Construction with Network Construction with One Single Instrument One Single Instrument...
Page 2
Wide Extremely Just connect a cable, and Check all parameters such as wiremap, Intuitive direction and cable length at a glance. press the TEST button Screen Direction (ID No.) Identify the terminator ID here. Cable Length Obtain a record of the entire length of the cable, or up to the point where the cable is damaged.
Page 3
Split pairs appear to be properly a tester capable of detecting split pairs is indispensable. connected to the untrained eye, and cannot be detected with continuity The HIOKI 3665-20 can do the job for you properly and testing. accurately by also detecting split pairs. GlobalTestSupply www.
Page 4
RJ-45 plugs Compatible connectors Measurement Items Wiring condition and shielding can be confirmed using the HIOKI TERMINATOR 9690 [Wiremap] Detectable errors: open, short, reversed, transposed, split pairs and other miswiring Measurable lengths: 2 to 300 m, 6.6 to 984 ft Measurement accuracy: ±4% rdg.
Need help?
Do you have a question about the HiTESTER 3665-20 and is the answer not in the manual?
Questions and answers