Table of Contents
Advertisement
T
ECHNICAL
Related Standards
The Baseline Switch 2226-PWR Plus has been designed to the
following standards:
Functional
ISO 8802-3, IEEE 802.3 (Ethernet), IEEE 802.3u (Fast
Ethernet), IEEE 802.3ab and IEEE 802.3z (Gigabit
Ethernet), IEEE 802.3x (Flow Control), IEEE 802.1D 1998
(Bridging)
MAC Address
8192
Safety
UL 60950-1 & CAS 60950-1 (CSA/CUS), IEC
60950-1(CE), EN 60950-1 (T
EMC Emissions
EN 55022 Class A, FCC Part 15 Subpart B Class A,
ICES-003 Class A, VCCI Class A
Immunity
EN 55024
Environmental
Operating Temperature
Humidity
Standard
Physical
Width
440 mm (17.3 in.)
Length
235 mm (9.2 in.)
R
EGULATORY
FCC Statement
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference to radio
communications, in which case the user will be required to correct the interference
at their own expense.
Information to the User
If this equipment does cause interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
■
Reorient the receiving antenna.
■
Relocate the equipment with respect to the receiver.
Move the equipment away from the receiver.
■
Plug the equipment into a different outlet so that equipment and receiver are on
■
different branch circuits.
If necessary, the user should consult the dealer or an experienced radio/television
technician for additional suggestions. The user may find the following booklet
prepared by the Federal Communications Commission helpful:
How to Identify and Resolve Radio-TV Interference Problems
This booklet is available from the U.S. Government Printing Office, Washington,
DC 20402, Stock No. 004-000-00345-4.
In order to meet FCC emissions limits, this equipment must be used only with
cables which comply with IEEE 802.3.
CE Statement (Europe)
This product complies with the European Low Voltage Directive 73/23/EEC and EMC
Directive 89/336/EEC as amended by European Directive 93/68/EEC/.
CSA Statement
This Class A digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement
sur le matériel brouilleur du Canada.
I
NFORMATION
V/GS)
Ü
0–45 °C (32–113 °F)
10–95% (non-condensing)
EN 60068 (IEC 68)—various parts
N
OTICES
Height
43.6 mm (1.75 in.) or 1U.
Weight
3.2 kg (7.6 lb)
Mounting
Free-standing, or 19 in. rack-mounted using the
supplied mounting kit
Electrical
Power Inlet
AC Line Frequency
Input Voltage
Current Rating
Maximum Power
Consumption
Maximum Power
Dissipation
PoE Maximum Output
Power per Port
Power can also be provided by the Switch through any
of its 24 Ethernet ports based on the IEEE 802.3af
Power over Ethernet (PoE) specifications. For PoE to
work, the receiving device must be PoE-compliant.
VCCI Statement
9
IEC 320
50/60 Hz
100–240 VAC
3 ampere (maximum)
196 watts
668.95 BTU/hr
15.4 watts
Advertisement
Table of Contents
